Fractal Audio Firmware Update Thread

[OrganicZed]

Axe-Fx III Firmware 28.01 Release

https://www.fractalaudio.com/downloads/firmware-presets/axe-fx-3/28p0/axefxiii_dsp_rel_28p01.zip Axe-Fx III Firmware Release Notes 28.01 Improved Spring Reverb algorithms. Added “Plexi Brown” tone stack. This is the tone stack from EVH’s amp with a 50K mid pot. Fixed rare crash when...

forum.fractalaudio.com

Axe-Fx III Firmware Release Notes​

28.01

Improved Spring Reverb algorithms.

Added “Plexi Brown” tone stack. This is the tone stack from EVH’s amp with a 50K mid pot.

Fixed rare crash when switching Compressor type from Axe-Edit.

Fixed global settings not recalled after using a song in a setlist and then rebooting.

Tweaked some power tube parameters slightly.

 

[marshall2553]

The spring reverbs sound really good to me now. I always heard a dissonance or harshness in them before, but that seems to be gone.

 

[Stone]

Improved Spring Reverb algorithms.

@metropolis_4 Will be the Judge

 

[Mongillo19]

@metropolis_4 Will be the Judge

It's gotta make it's way down to the FM3 first

Speaking of which, I have to imagine the FM engineers are punching the air as much as Cliff keeps updating things

 

[GTR37]

It's gotta make it's way down to the FM3 first

Speaking of which, I have to imagine the FM engineers are punching the air as much as Cliff keeps updating things

Ah no this isn’t the worst
I think he did like 9 betas on one of the prior updates
And in like over a course of
2 or 3 weeks

 

[holoholo]

I thought the new spring reverbs aren't going to come to the fm3?

From that 2024 update that overhauled the spring reverbs:

We tried to get the new reverbs in there but the CPU hit would cause much consternation, I reckon.

Those new spring and plate algorithms are resource hogs.

 

[metropolis_4]

@metropolis_4 Will be the Judge

I wish there was some hope of these making it to the fm3

The old springs are painful, I don’t even use spring anymore and I miss it

 

[Stone]

I thought the new spring reverbs aren't going to come to the fm3?

From that 2024 update that overhauled the spring reverbs:

This is true But consider it might be possible to do with a Limited Chain, most Spring Reverb Tones dont require Long Complex Kitchen Sink presets
That's the way id see it for the FM3, here it is as an option but its limited IE : maybe Light comp -->amp --->cab and Spring
I cant say for sure but this might be possible

 

[metropolis_4]

This is true But consider it might be possible to do with a Limited Chain, most Spring Reverb Tones dont require Long Complex Kitchen Sink presets
That's the way id see it for the FM3, here it is as an option but its limited IE : maybe Light comp -->amp --->cab and Spring
I cant say for sure but this might be possible

I’m crossing my fingers hoping they’ll put them in there and let us choose to use them knowing the costs.

I’m moving towards using my fm3 mostly just as a digital amp and not an all-in-one, so having access to better reverbs when I’m only planning to use a few blocks in the chain would be perfect for me

 

[KingsXJJ]

I could see running a nice Plexi or JCM with one of the newer plates and the amp only and being pleased with my FM3’s output!

 

[ᛗᛜᛜᚺDᛜᎶ Ꮤᛨᚳᚴ]

https://forum.fractalaudio.com/threads/axe-fx-iii-firmware-28-02-release.211806/

https://www.fractalaudio.com/downloads/firmware-presets/axe-fx-3/28p0/axefxiii_dsp_rel_28p02.zip

An updated Axe-Edit to support this firmware is available here:
https://forum.fractalaudio.com/threads/axe-edit-iii-1-14-12.211807

Axe-Fx III Firmware Release Notes​

28.02

Added adjustable Q to Low Cut and High Cut in Reverb block. Note: The Q only affects the response if the Slope is set to 12 dB/oct.

Updated spring models in Reverb block. A soft reset is recommended if you use these types to load the new default values.

Added Vibrato-King Custom Spring type.

Changed name of “Spring Drive” to “Dwell” as this is what is commonly used on spring reverb units. Note that the Dwell control is automatically compensated. Therefore, changing the Dwell will not affect the mix unlike a hardware spring reverb, it will just make the sound more “splashy”.

Rearranged Spring Reverb menu so that most commonly used controls are on the same line.

Added Negative Feedback control to UI for Friedman BE/HBE models since this is now a control on the actual amp.

Improved Amp block phase inverter grid clipping model accuracy.

 

[Blix]

The Fractal presets pack sellers every time Cliff posts a new FW.

 

[JiveTurkey]

Buying FAS presets is really, really weird to me. Chuck an IR you know and love in the chain, put an amp you know and love in the chain. Done.

 

[Aleksi]

Buying FAS presets is really, really weird to me. Chuck an IR you know and love in the chain, put an amp you know and love in the chain. Done.

Don't forget to complete the 12 year Cooper Carter Fractal Basix course so you know how to add a chorus and a reverb.

 

[JiveTurkey]

Don't forget to complete the 12 year Cooper Carter Fractal Basix course so you know how to add a chorus and a reverb.

I had a Cooper Carter Modifier University bit worked up but it ended up on the cutting room floor

 

[James Freeman]

Improved Amp block phase inverter grid clipping model accuracy.

I haven't tested yet but I hope the pi has more squish when assaulted with treble, it's essential for authentic plexi tones.

 

[Stone]

I haven't tested yet but I hope the pi has more squish when assaulted with treble, it's essential for authentic plexi tones.

James you really don't want your Pi Squished now do you ?

 

[KingsXJJ]

James you really don't want your Pi Squished now do you ?

I want a squish knob for any stage of inversion! In real life too.

 

[TSJMajesty]

This is great! For a long time, Fractal hadn't done preset updates, but recently they finally did, and now here's yet another one!

Axe-Fx III Factory Presets for firmware 28.03

The Axe-Fx III factory presets have been updated for firmware version 28.03 or newer. As always, it is strongly recommended that you back up your Axe-Fx using Fractal-Bot before performing any update...

forum.fractalaudio.com

 

[Stone]

This is great! For a long time, Fractal hadn't done preset updates, but recently they finally did, and now here's yet another one!

Axe-Fx III Factory Presets for firmware 28.03

The Axe-Fx III factory presets have been updated for firmware version 28.03 or newer. As always, it is strongly recommended that you back up your Axe-Fx using Fractal-Bot before performing any update...

forum.fractalaudio.com

Which also --->