metropolis_4
Rock Star
- Messages
- 2,646
I think we’ve already done this, but we’ve got a bunch of new people and I always love talking about the gear we’re using and seeing other peoples rigs.
Here’s my current setup:
The MultiAC is going into the SY-1000 and the AxeFX is sending MIDI to the SY for preset changes.
Out1 - FOH
Out2 - Monitor
Input 2 is a XLR monitor feed from the board that runs through Amp2 set to Tube Pre and then to Out2. So I can EQ and set level for this feed and control it from the front panel of the AxeFX. Amp2 is set to global blocks so changes I make to monitor mix propagate across all presets.
Here’s my current setup:
The MultiAC is going into the SY-1000 and the AxeFX is sending MIDI to the SY for preset changes.
Out1 - FOH
Out2 - Monitor
Input 2 is a XLR monitor feed from the board that runs through Amp2 set to Tube Pre and then to Out2. So I can EQ and set level for this feed and control it from the front panel of the AxeFX. Amp2 is set to global blocks so changes I make to monitor mix propagate across all presets.