Line 6 Helix Stadium

[Lysander]

If anyone here's going to the Guitar Summit in Mannheim later this month, we'll be digging into more details. I think people might get to play Agoura there as well; not sure yet.

Shit, i'm actually in the States for work that week

 

[StarF666]

This is probably more than you asked for, but...

• FS6 (MODE) can be set to toggle between any two modes you want
• FS6 (MODE) now shows you the mode you'll exit out to when leaving a mode not assigned to FS6
• Hold FS6 for More Mode—lets you access 4 additional modes without having to remember the shortcuts: Stomp B, Snapshot, Combi, or Transport
• From More mode, press-hold Stomp B, Snapshot, Combi, or Transport to swap it out for the current/queued FS6 Mode
• More mode also lets you open/close Info view, start/stop preset clips, start/stop the click, start/stop/reset the stopwatch, quicksave the preset, and quickly mute all outputs
• Combo mode (different modes on the top and bottom rows, plus Bank/Preset/Snapshot/Song/Marker Up and Down) is now separate from Preset mode
• Effects are now automatically assigned to stomps (like POD Go), but you can turn this off
• Pressing a stomp switch can now jump to the assigned item (like POD Go), but you can set item selection to Touch (default), Press, Touch+Press, or Off.
• Individual Stomp switches now support up to 16 assignments (vs. 8 in Helix/HX)
• If you forget the shortcut, assigning a stomp can also be accomplished from the block's Action panel, or for stompshots, learning from the parameter's panel
• Stompshot (or other controller) assignment now takes 2 seconds instead of 3. Press-hold the parameter knob, press the stomp switch, done
• Stompshots now work independently from snapshots. A parameter can be assigned to a local controller (stomp, expression pedal, X/Y controller axis, trigger, etc.), a snapshot, and (not or) MIDI CC or note independently
• Command Center command parameters have individual snapshot control, just like Home screen block parameters
• Tap-holding a stomp opens the quick assign dialog, letting you rename/recolor the stomp and select latching/momentary operation, but you can now also quickly clear the stomp
• As with Snapshot switches in Helix/HX, Preset mode switches can now be user-colored
• All Capacitive touch can now be disabled for you gross dudes who insist on playing barefoot

Many more footswitch/control enhancements are planned for later.

That's a lot of information. Will it be possible to map block parameters to the encoders for the home screen (or some kind of live screen)? In a live situation I'd love to have instant access to my most used parameters like gain, volume, delay and reverb mix.

 

[StarF666]

If anyone here's going to the Guitar Summit in Mannheim later this month, we'll be digging into more details. I think people might get to play Agoura there as well; not sure yet.

Both Paul and I are going.

Dang. Would've loved to say hello. But that weekend is already overbooked.

 

[CrazyD]

If anyone here's going to the Guitar Summit in Mannheim later this month, we'll be digging into more details. I think people might get to play Agoura there as well; not sure yet.

Both Paul and I are going.

Very cool. @Digital Igloo will you and Paul both be there on Sunday ,too? I am there that day attending a master class and it would be great to meet you in person
November our second album is coming out and both guitars were recorded with Helix only. It's already a great platform, and I'm really looking forward to the stadium

 

[Frodebro]

I was going to wait for the Stadium Stomp, but now I think since I’m building a monster FM9 board, perhaps the standard Stadium with backpack as a Purse Rig would be cool.

I’m still very seriously considering putting together a FM9/Stadium rig. I’ve run my Stomp XL with the FM9 and really like having access to both at the same time.

 

[HotRats]

Sounds interesting, but not sure I will understand the benefits of most of this until I see a demo.

is it possible now or in the near future to program a few foot switches to toggle on tap between different snapshots, say 1 and 2, and program hold to go directly to snap 2? While all other foot switches are used for turning individual effects on/off?

If I understand correctly what you mean this is already possible with current helix hardware

 

[Richard_G]

I’m still very seriously considering putting together a FM9/Stadium rig. I’ve run my Stomp XL with the FM9 and really like having access to both at the same time.

View attachment 51491

Sounds... hmmm... interestering. May be quite a bit of redundancy though?

 

[Frodebro]

Sounds... hmmm... interestering. May be quite a bit of redundancy though?

Way less than you would think. Line 6 has their flavor of things, Fractal has theirs.

 

[Digital Igloo]

That exists already. The rest reads most excellent.

Crap, you're right. Edited.

Is it possible now or in the near future to program a few foot switches to toggle on tap between different snapshots, say 1 and 2...

Helix/HX can do this now via the Command Center.

...and program hold to go directly to snap 2? While all other foot switches are used for turning individual effects on/off?

There are now up to two commands for each stomp, but unfortunately, toggling between two specific snapshots would use both of them.

That's a lot of information. Will it be possible to map block parameters to the encoders for the home screen (or some kind of live screen)? In a live situation I'd love to have instant access to my most used parameters like gain, volume, delay and reverb mix.

Not at launch.

Very cool. @Digital Igloo will you and Paul both be there on Sunday too?

Paul might but I have to take off on Sunday.

 

[Lysander]

Uncomfortably excited about this. Looks like the LT's view display at a first glance, but there's a lot more going on here.

 

[paisleywookiee]

I’m still very seriously considering putting together a FM9/Stadium rig. I’ve run my Stomp XL with the FM9 and really like having access to both at the same time.

View attachment 51491

I wonder if you can run the FM9 out to the Helix Stadium via spdif, so there’s no extra conversion.

 

[Frodebro]

I wonder if you can run the FM9 out to the Helix Stadium via spdif, so there’s no extra conversion.

I run the Stomp XL in a loop so that I can insert it into the chain wherever I want it. Whatever additional latency occurs isn’t enough to bother me.

 

[Orvillain]

I wonder if you can run the FM9 out to the Helix Stadium via spdif, so there’s no extra conversion.

It has just dawned on me, you could do the same with Stadium and Fractal VP4.

 

[Frodebro]

It has just dawned on me, you could do the same with Stadium and Fractal VP4.

 

[paisleywookiee]

I run the Stomp XL in a loop so that I can insert it into the chain wherever I want it. Whatever additional latency occurs isn’t enough to bother me.

Yeah. But if you could do spdif in AND out, you could do the same, and preserve the sanctity of toan.

 

[Orvillain]

View attachment 51498

That's fucked up.

 

[Frodebro]

That's fucked up.

We all have our role to play here.

 

[Orvillain]

I definitely already posted this once before, but just mulling it over:

That's a Pedaltrain XD-24. Along the bottom I can fit the Helix Stadium Floor and my BB535 wah. Then I could have the VP4 connected via SPDIF, and put the RV-5 in its own loop and the MercuryX in its own loop, on the Stadium Floor. Then I've got two loops left.

A Warwick Rockboard MOD2 would complete the picture, having that at the top end of the board as my main I/O entry point.

 

[Digital Igloo]

I wonder if you can run the FM9 out to the Helix Stadium via spdif, so there’s no extra conversion.

Both Stadium and FM9 run at 48kHz natively so yeah, that should work.

Uncomfortably excited about this. Looks like the LT's view display at a first glance, but there's a lot more going on here.

View attachment 51497

What's the over/under on when someone not familiar with LT pops in, saying "DuRr! They copied QC's gIG ViEw!"

 

[Orvillain]

The icons look very stylish.