Assigning the six knobs under helix display

[pipelineaudio]

Is there a way to assign these knobs to specific functions? Maybe thru command center? I'd really like one to always be gain for the amp and another to Key for the harmonizer

 

[Blix]

Yes you definitely can, I had delay mix, reverb mix, lo/hi cut etc on mine. I of course don't remember how you do it.,

 

[mbenigni]

A la FAS performance mode. I recommended this several years back, but nothing ever came of it. Could be as simple as making these assignments (if any) active whenever you’re in the preset selection (as opposed to preset edit) mode.

 

[Blix]

A la FAS performance mode. I recommended this several years back, but nothing ever came of it. Could be as simple as making these assignments (if any) active whenever you’re in the preset selection (as opposed to preset edit) mode.

Maybe my memory is playing tricks with me....

 

[mbenigni]

Maybe my memory is playing tricks with me....

Or mine is. :) I’d love to be wrong!

 

[Blix]

Or mine is. :) I’d love to be wrong!

I just skimmed through the Helix manual, I think I was wrong unfortunately. We need @Digital Igloo on this!

 

[pipelineaudio]

Yes please @Digital Igloo ! I can't seem to find a way either

 

[the swede]

If it isnt in command center… it isnt.

At least that’s what I think.


Swede showing himself out… again.

 

[Foxmeister]

What we really need is for the performance view on the LT to be brought to the full range and "extended" to allow for 6 user-selectable controls above the physical knobs, similar to the FAS performance page already mentioned in this thread.

 

[James Freeman]

Is there a way to assign these knobs to specific functions?

No.

What we really need is for the performance view on the LT to be brought to the full range and "extended" to allow for 6 user-selectable controls above the physical knobs, similar to the FAS performance page already mentioned in this thread.

And also an option to disable/lock the encoders, joystick, preset knob, soft buttons and touch functionality in performance mode, basically anything that the guitar cable can accidentally turn needs to be disabled, only the footswitches and expression active.
Hold 'Home' for 4 seconds to enter/exit locked performance mode, etc.

 

[Karl Houseknecht]

How wild are you guys getting on stage that you’re slapping the cable all over the face of the unit?

 

[James Freeman]

Sterlacci permanently taped the preset knob for this reason.
I've read people taping the big volume knob, which can magically move itself during a performance.
Also, who the heck thought that rotating the joystick to change a model is a good default?
Yes, these things are common, Helix could really use a 'lock' mode.

 

[the-trooper]

Yes, these things are common, Helix could really use a 'lock' mode.

Also if you leave it with the tuner on, and come back to tune but don't check the frequency. Start to play. Have everyone look at you.
Or so I'm told. Not that that ever happened to me.

 

[Digital Igloo]

Is there a way to assign these knobs to specific functions? Maybe thru command center? I'd really like one to always be gain for the amp and another to Key for the harmonizer

Unfortunately no.

 

[ian_dissonance]

How wild are you guys getting on stage that you’re slapping the cable all over the face of the unit?

The real question is why aren’t you wireless if you move around that much?