St. Rock AMPERIUM LIVE

Im struggling to change presets on the unit itself. The selected preset shows on the screen but plays only the one I selected on the app before closing the app and my computer and using the Amperium in standalone mode. I can go to an empty bank, I'll still have the same and unique sound.
Looks like a bug, I can scroll with the control knob all the presets, but I always get the sound of the one I selected on the app.
I would like to take the Amperium to my rehersal tomorrow but if the only way to change a preset is to do it on my phone, not very practical...
 
Last edited:
Dastorg said:
Im struggling to change presets on the unit itself. The selected preset shows on the screen but plays only the one I selected on the app before closing the app and my computer and using the Amperium in standalone mode.
Looks like a bug, I can scroll with the control knob all the presets, but I always get the sound of the one I selected on the app.
I would like to take the Amperium to my rehersal tomorrow but if the only way to change a preset is to do it on my phone, not very practical...
Click to expand...
While using the app you can only change de output, everything else is locked, they will fix this soon.
 
I got the 2.09 running but still have the same issue, only 1 bank usable on the unit standalone mode, if I want to change I need my phone and the app...Frustrating...
 
2 ways to change bank :
1 . by hands with controls knob.
2. Long press C. You will see navigate menu, where A - down, B - up, C - confirm, D - cancel
 
st.Rock said:
2 ways to change bank :
1 . by hands with controls knob.
2. Long press C. You will see navigate menu, where A - down, B - up, C - confirm, D - cancel
Click to expand...
Like I said the control knob shows the correct choosen bank on the screen but plays only the last sound I played on the app. In short, I can use only 1 preset/bank in standalone mode... When the app is open, no problem, bus as soon as it's closed, I'll have the same sound on the 100+ banks however I scroll the controm knob.
Am I the only one with that issue?
 
st.Rock said:
2 ways to change bank :
1 . by hands with controls knob.
2. Long press C. You will see navigate menu, where A - down, B - up, C - confirm, D - cancel
Click to expand...
You can change the bank yes, but I always have the same sound in any bank I choose, even empty ones!
 
I solved the problem! On the unit itself, when you go from one bank to another, you turn the control knob and press on it, which I never did before!
I was used to the Helix where you just had to turn the knob and the preset would change...
Anyway thanks a lot to both of you for your support and help!
At least all that made me go deeply into the guts of the machine and app, now I think I know it pretty well!
 
There is a bug with Setlists in 2.09beta (this is my first time using Setlists, so, I dont know whether it's a pre-existing bug).

I encountered it today at rehearsal. Loaded my setlist up (A) and all the sounds loaded as normal, except for two sounds, which were both the same clean sound. This didn't happen after I loaded my 2nd setlist (B), then, went back to the first setlist. The 2 clean sounds loaded fine after re-loading.

Another bug. After I created setlist A, I made setlist B. The bug is, in setlist A after the last song, there is one additional preset which shouldn't be there, which is the first preset of the first song in setlist B. This bug is confirmed. I can recreate this bug. Even deleting all the songs in setlist A, then, putting in only 1 song, the unwanted extra preset is there.

Update: I recreated setlist A for setlist C and the extra preset is not there, so, it seems to affect setlist A only.
Update 2: I checked setlist B for the bug, and sure enough, setlist B also has this bug. There is an extra preset at the end of setlist B, which is the first preset of setlist C.
Update 3: If I clear setlist B (empty) there is no extra preset in setlist A. As a work around, using only setlist A and C seems to avoid this bug.
Update 4: One of the presets in setlist A is louder than normal upon loading. It takes 10-15 seconds before it settles down and goes back to normal volume. The affected tone is based-on amp 54: Fendep Twin with MD Plus in front of it. However, it could likely be just a setlist bug.

Update 5:
I have found a fix for the clean sounds not working in setlist.

On my unit I have the first loaded sound to be bank 11 C on start-up, which is a distortion sound.
If I first press A (which is a clean sound, and coincidently, the same clean sound that isn't working in setlists), then, change to setlists mode (A), then, the clean sounds work.

If I dont change the sound to A on boot-up, and leave it on C, then, load setlists, the clean sounds dont work.

Another fix is if I set the bootup sound to 11 A, then, this also fixes the setlist clean sounds.
 
Last edited:
Downloaded 2.09 last night. I only got a little time with it but the new amps sound great. I can't wait to really dive in tonight after work.
 
Hello everyone. Before, I wrote on the forum that I still hear strange noises when switching presets. I now know where I went wrong. All the time I used the headphone output which is not grounded. After I started using xlr outputs with a quality cable, the problem is already gone. I'm excited about the new amps at the moment. You won't find them in any other modeler. I'm already looking forward to the updated android app. Now I am completely satisfied with the Amperium. Good job St. Rock
 
Hi St.Rock, could you upload a laney ironheart60(100) amp to amperium live? It is a matter of my heart and I have probably never seen this head in any other modeler. The diagram can be downloaded from the Internet. Ironheart is specific because it has push pull eq potentiometers that change the effectiveness of the correction. Jezisek40
 
Last edited:
Did you guys sneak a Twin Reverb into the beta 2.09 without telling anybody?
I genuinely hope that this device will never stop working!
Thank you <3
 
Hi mates, theres a bug in the multifx section, open the app, create a tone, add multifx in delay/reverb block, dial the fx, save the tone, works just fine, shut the pedal, shut the app, turn on the pedal, turn on the app, the fx now is some random shimmer with stock parameters. This needs a fix TYVM
 
guarino88 said:
Hi mates, theres a bug in the multifx section, open the app, create a tone, add multifx in delay/reverb block, dial the fx, save the tone, works just fine, shut the pedal, shut the app, turn on the pedal, turn on the app, the fx now is some random shimmer with stock parameters. This needs a fix TYVM
Click to expand...
what os, what version of software? etc...
 
guarino88 said:
Hi mates, theres a bug in the multifx section, open the app, create a tone, add multifx in delay/reverb block, dial the fx, save the tone, works just fine, shut the pedal, shut the app, turn on the pedal, turn on the app, the fx now is some random shimmer with stock parameters. This needs a fix TYVM
Click to expand...
Tried to replicate it but can't confirm this behavior. For me it's functioning just fine.

Windows 11 Pro
Version 10.0.22631 Build 22631
Amperium SW: 2.09
Amperium HW: 2.09.24137.1658

I encountered a visual bug, that is very specific though so i hope i can describe it good enough to be understandable.
Whenever i open the app and drag the window from my main monitor (1440p) to my secondary monitor (4k) every time i open up a drop down menu (for example changing tubes or bright switch) - the activated elements in the signal path (shown with a yellow font) turn to grey (as if they were deactivated). It's just visual though they still are active. To reset that i need to click on a different element in the signal chain (for example from the preamp to the poweramp)
This ONLY happens on the secondary monitor. When i have the window on the main monitor everything works just fine.

before:
before.png


after clicking on a drop down menu:
after.png
 
You must log in or register to reply here.

Similar threads

BenIfin
Rock - Classic Rock Players ..... do you have Reverb Blocks in your Live Presets (?)
2
Replies
22
Views
2K
vino_buono
vino_buono
BenIfin
Im Bored. Riddle Me This. Tonex Pedal -vs- Nano Cortex ?
2 3
Replies
43
Views
2K
Shredder777
Shredder777
Sascha Franck
Donner Arena 2000 - possibly the best UI on a small modeler?
3 4 5
Replies
81
Views
7K
timbuck3
timbuck3
laxu
Hotone Ampero II Stomp - Review
5 6 7
Replies
123
Views
5K
laxu
laxu
Count_Drugula
Speaker Recommendation for New Cab (Port City 112 OS)?
Replies
9
Views
204
Count_Drugula
Count_Drugula
Back
Top