BROCKSTAR
Shredder
- Messages
- 1,888
I am doing a double header this weekend with the GM. I am going to take @BROCKSTAR global eq leveling trick.
To be honest, that was someone else's trick that I just relayed here ;P
I am doing a double header this weekend with the GM. I am going to take @BROCKSTAR global eq leveling trick.
I'll take it either way!To be honest, that was someone else's trick that I just relayed here ;P
I’ve got to fire mine back up. My interest in gear has exceeded my ability to actually use any of it lately.![]()
FALL COSMO IMPROV
#bossgm800 #eventideh90 #merislvx #line6helix #luminitefx #prs
More info about me - https://linktr.ee/brockdavisson1978
Can find it on youtube too!
Nice work dude!
FALL COSMO IMPROV
#bossgm800 #eventideh90 #merislvx #line6helix #luminitefx #prs
More info about me - https://linktr.ee/brockdavisson1978
Can find it on youtube too!
Killer dude.
II don't know exactly but it seems like an envelope follower that raised an input gain to the 'loud' voice so it only plays input levels that exceed the triggering level of the envelope? or a signal mixer that drops one level and raises the other relative to the envelopeI'm pretty sure I've seen talk of GM-800 patches that can add voices depending on velocity — say a patch where it comes out as a sax when playing normally but adds in brass if you hit the strings harder.
How do you build a patch like that? I don't see an appropriate parameter.
I'm pretty sure I've seen talk of GM-800 patches that can add voices depending on velocity — say a patch where it comes out as a sax when playing normally but adds in brass if you hit the strings harder.
How do you build a patch like that? I don't see an appropriate parameter.
Or to keep it simple, is there a way to turn parts on and off via MIDI?
I dug around in the editor trying to find a workaround (because Boss). I thought this would only select parts, not turn them on and off? Because BossYes by the assign matrix, but you have to set it up for each preset. Hit menu, then control assign, then assign settings
In there you would use "tone sel part sw" for P1, P2, P3, P4. and on next page under source change it to midi cc# and use any midi cc number you wanna dedicate too it etc.. Make sure you save each preset after you're done setting it up.
Alternate route you can buy four boss fs-5u switches and 2 Y-cable things (forget the name right now) and go to control assign, then control function and set up ctl 3,4,5,6 in that matrix for "part on/off" etc.
Yes by the assign matrix, but you have to set it up for each preset. Hit menu, then control assign, then assign settings
In there you would use "tone sel part sw" for P1, P2, P3, P4. and on next page under source change it to midi cc# and use any midi cc number you wanna dedicate too it etc.. Make sure you save each preset after you're done setting it up.
Alternate route you can buy four boss fs-5u switches and 2 Y-cable things (forget the name right now) and go to control assign, then control function and set up ctl 3,4,5,6 in that matrix for "part on/off" etc.