Kemper Profiler MK 2

[BenIfin]

..... and I will add that I am feeling more positive about have grabbed a Player a few weeks ago to try this new 2.0 stuff first hand when it comes out.

 

[Jarick]

I think it is a bit of a stretch to call liquid profiling component modeling. It's applying different tone stack behaviors, but have they said it's actually modeling the tone stack at a component level and also the interaction with the different pre-amp stages before and after at a component level? I would be absolutely shocked if it was component modeling for a number of reasons.

I’ve never heard it called component modeling either. I always thought it was as you described as well, it makes the eq act more like the real amp tone stack at least in frequency settings and makes the gain control more realistic by modeling bright cap behavior. I thought it’s basically all eq but does work very well.

The idea with liquid profiles is to capture an amp dialed in really well at the most gain you’d want, mark the eq and gain knobs from the amp on Kemper so it k owe the starting point, and then it can do the eq thing when you turn the knobs. It’s really effective imo.

 

[BenIfin]

...It’s really effective imo.

Very, very effective .... as long as you use one of the Kemper 30 or so "modelled" Amp Gain and EQ stacks.

Even with the MK1 LP Profiling, a well done LP is a dream to tweak .... it sounds and feels just like adjusting the controls on "a" real tube Amp.

I'm hoping / expecting :) MK2 2.0 + LP's will up this even more.

 

[Orvillain]

I may be totally out of my understanding here, but for Tonex or NAM would not, say, 1024 different knob captures, take at least something like ~90 <-> 120 hours of just individual capturing time before even doing the interpolation ? ... that's like around 8 hours a day for 12 <-> 15 days of just capturing ..... anyone that did that would go insane

So to extrapolate ..... if you have a basic Amp with just 6 x knobs ie: G / B / M / T / P / MV .... to get roughly 1024 capture points across 6 differnet interacting knobs, each knob can only be captured at just over 3 [ 3.2 ] distinct settings .... so that leaves an awful lot of very large "gaps" for the interpolation to be right and accurate in "filling in" ?)

Again, my apologies up front if my math's is fucked up.

Enter, TINA.