Helix Talk

[BahamaDada]

I guess we're all better off here than in Shillville.

PS: Musikerboard? Ich verlauf mich manchmal dorthin und bin jedes Mal schockiert, wie schlecht viele der dort Postenden informiert sind.

SuFu benutzen. Ich mach hier mal zu!

See signature of Mr. Franck.

I stand corrected :-D

 

[Sascha Franck]

Hachja, das Musikerboard. Da bin ich seinerzeit mal von Bord geflogen, u.a. weil ich mich mit Johannes Hofmann angelegt habe. Würde ich jederzeit wieder tun, was ein Arschloch.

(sorry for the german blurb)

 

[dronerstone]

Hachja, das Musikerboard. Da bin ich seinerzeit mal von Bord geflogen, u.a. weil ich mich mit Johannes Hofmann angelegt habe. Würde ich jederzeit wieder tun, was ein Arschloch.

(sorry for the german blurb)

I feel you, Nachbar.

 

[TheTrueZoltan!]

Musiker-Board users are perhaps the dumbest on the entire internet.

 

[pipelineaudio]

There was a really good learning with line 6 today about splits

 

[zib]

There was a really good learning with line 6 today about splits

That was great (so I post it)

 

[James Freeman]

Dear Helix overlords, please add Shift+Click on the slider/parameter to set it to 5.0 in HX Edit and Native.
Ctrl+Click sets the slider to factory default, Alt+Click assigns the parameter to Snapshot, Shift does nothing...
I need this.

edit:
Or better yet, Shift+Click sets the parameter to saved User Default.

 

[norminal]

Dear Helix overlords, please add Shift+Click on the slider/parameter to set it to 5.0 in HX Edit and Native.
Ctrl+Click sets the slider to factory default, Alt+Click assigns the parameter to Snapshot, Shift does nothing...
I need this.

edit:
Or better yet, Shift+Click sets the parameter to saved User Default.

Or double click to set to “noon.”

 

[James Freeman]

Or double click to set to “noon.”

Yes 5.0 or 'noon' is an important point in guitar gear.
Middle mouse click also does nothing, it will be the fastest way.

 

[Foxmeister]

Ctrl+Click sets the slider to factory default, Alt+Click assigns the parameter to Snapshot, Shift does nothing...
I need this.

Terrible UI - completely unusable!

FACT!



Helix...

 

[eggpl@nt]

Dear Helix overlords, please add Shift+Click on the slider/parameter to set it to 5.0 in HX Edit and Native.
Ctrl+Click sets the slider to factory default, Alt+Click assigns the parameter to Snapshot, Shift does nothing...
I need this.

edit:
Or better yet, Shift+Click sets the parameter to saved User Default.

Add a tuner view to HX Edit too pls

 

[HotRats]

Here some (pretty old but amazing) ideas posted on idea scale that you might like and vote.

Add a second 10 stomp page: add a second 10 stomp page using FS6 (losing pedal edit mode and moving "mode" access to press & hold) for cycling through page 1 and 2.

https://line6.ideascale.com/c/idea/35320

X/OR switching mode: link footswitches in groups where turning on one FS on will toggle off all the others in the same group (and vice versa)

https://line6.ideascale.com/c/idea/35409

Add a delta mode to parameter assignments: add/subtract a fixed value to a parameter instead of setting a min and max.

https://line6.ideascale.com/c/idea/40682

 

[dk_ace]

I also liked the M13. The drives weren't that great but otherwise a good unit. I didn't have any technical issues with it. Sold it when I got the first gen Axe-Fx Standard.

I ran an m13 WITH my Axe Standard. Not excessive at all….

D

 

[Digital Igloo]

X/OR switching mode: link footswitches in groups where turning on one FS on will toggle off all the others in the same group (and vice versa)

https://line6.ideascale.com/c/idea/35409

Maybe I'm missing something but isn't this how stomp switches work right now? You can assign up to 8 blocks to a stomp switch; those active will toggle their states with those bypassed.

 

[CakeEater]

Maybe I'm missing something but isn't this how stomp switches work right now? You can assign up to 8 blocks to a stomp switch; those active will toggle their states with those bypassed.

I think he means foot-switches 1, 2 and 3 could be a group, and activating footswitch 1 would turn off foot-switches 2 and 3. I may be wrong, there does seem to be a lot of cross-over with snapshots for facilitating that.

 

[HotRats]

Maybe I'm missing something but isn't this how stomp switches work right now? You can assign up to 8 blocks to a stomp switch; those active will toggle their states with those bypassed.

I mean a different thing.

Imagine you have 3 overdrives for 3 basic sounds, cleanish, crunch and lead and you assign each OD to it's own FS:
od1 to FS1;
od2 to FS2,
od3 to FS3

and you want use only one at the time, like a 3ch amp.
therefore you need

od1 and od3 to be bypassed when you select od2
od1 and od2 to be bypassed when you select od3
od2 and od3 to be bypassed when you select od1

just like a solo button on a console when set a to be non latching.

Edit: @CakeEater beat me!

Edit2: I'm aware that we can achive the same result using snapshots but that's not always the best way to operate.

 

[ragingplatypi]

I mean a different thing.

Imagine you have 3 overdrives for 3 basic sounds, cleanish, crunch and lead and you assign each OD to it's own FS:
od1 to FS1;
od2 to FS2,
od3 to FS3

and you want use only one at the time, like a 3ch amp.
therefore you need

od1 and od3 to be bypassed when you select od2
od1 and od2 to be bypassed when you select od3
od2 and od3 to be bypassed when you select od1

just like a solo button on a console when set a to be non latching.


Edit: @CakeEater beat me!

Are you using snapshots for another application on this patch?

 

[James Freeman]

How is that different than creating snapshots with only the pedals you want engaged?

 

[HotRats]

How is that different than creating snapshots with only the pedals you want engaged?

is different because with snapshots you can have only 1 group of toggling footswitches.

If you need let's say 1 group of toggling overdrives and a group of toggling modulations you can't do that.

 

[HotRats]

Are you using snapshots for another application on this patch?

yeah, that might be a scenario