Mongillo19
Rock Star
- Messages
- 5,648
I feel like we are all
Fractal Talk
- Thread starter laxu
- Start date
JiveTurkey
Goatlord
- Messages
- 18,452
I have a jam room stuffed to the ceiling with Fractal gear. But it's like Brock is talking about buying a GT1000 and focusing on the updatesI feel like we are all
BROCKSTAR
Roadie
- Messages
- 902
what????
JiveTurkey
Goatlord
- Messages
- 18,452
As far as I know still; you have to manually compensate for latency when using the FM3 as an interface.
Latency Compensation Measurement
Note: This problem has been fixed in the USB firmware for the Axe-FX III and FM9. Just make sure you are using the latest version of the USB firmware and there will be no need for this workaround. If you are using an FM3 however, you may still need to use this workaround. Latency...
Sorry. Not trying to be a wet blanket
Mongillo19
Rock Star
- Messages
- 5,648
The FM3 interface isn't considered to be a strong suit of the FM3. I think it will suffice but most use a dedicated AI as it just gets to complicated/not as efficient vs having a dedicated unit.
Mongillo19
Rock Star
- Messages
- 5,648
Nah I'm just messing around. It's good to know these things going in!I have a jam room stuffed to the ceiling with Fractal gear. But it's like Brock is talking about buying a GT1000 and focusing on the updates
JiveTurkey
Goatlord
- Messages
- 18,452
Ugh, why no one tell me until now lol
If i can record one track of live guitar shredding over a backing track in my reaper daw then im ok lol
Then I can just align it when im done if needed.
JiveTurkey
Goatlord
- Messages
- 18,452
You should be good. If you see some strange behavior that fits that pattern; you'll know what to adjust.
duzie
Shredder
- Messages
- 1,901
This is a good question that usually gets swept under the rug as a non-issue .
JiveTurkey
Goatlord
- Messages
- 18,452
It should get looked at I'd say. But it has been around in some form since it's release and at this point; I don't think it's a priority. It was a convo topic even back at TOP so it's kinda always been floating in the background anytime the concept of using it as an interface comes up.
Frodebro
Shredder
- Messages
- 2,351
Ugh, why no one tell me until now lol
If i can record one track of live guitar shredding over a backing track in my reaper daw then im ok lol
Then I can just align it when im done if needed.
You could also record just the backing track first, then lay down the noodlie-noodlies on a separate track on a second pass.
Loopers are great live tools, but if you’re running into a DAW their value diminishes significantly.
https://thegearforum.com/threads/new-line-6-catalyst-cx-amps.4901/
There's a recent thread on the fractal forum about the issue which hasn't been locked yet It sure seems like it'll never be fixed, but at least they've heard our concerns 
There's a recent thread on the fractal forum about the issue which hasn't been locked yet
It sure seems like it'll never be fixed, but at least they've heard our concerns
BROCKSTAR
Roadie
- Messages
- 902
I am ready for when my fm3 turbo arrives hopefully monday!
Just rearranged things.
Right now it's guitar into boss vg-800 (zoia and eventide h90 in vg800 fx loop) and into gm-800, and the outputs of my vg-800 with a hosa ts-to-trs cable going into fractal vp4 input, and vp4 outputs into my jbl speakers and working fine.
When fm3 arrives I'll just take the vg-800 outputs into the input of fm3, and then when my xlr cables come, i'll run them out from fm3 into jbl's and then run the vp4 in the fm3 fx loop
My helix floor is off the main desk and sitting on side desk with my ableton move and tempera. I'll dedicate my helix floor as a hardware synth hub for now, but i can still use it for guitar if i want as i'll have the outputs of helix into my jbl's as well via 1/4th cables!
Just rearranged things.
Right now it's guitar into boss vg-800 (zoia and eventide h90 in vg800 fx loop) and into gm-800, and the outputs of my vg-800 with a hosa ts-to-trs cable going into fractal vp4 input, and vp4 outputs into my jbl speakers and working fine.
When fm3 arrives I'll just take the vg-800 outputs into the input of fm3, and then when my xlr cables come, i'll run them out from fm3 into jbl's and then run the vp4 in the fm3 fx loop
My helix floor is off the main desk and sitting on side desk with my ableton move and tempera. I'll dedicate my helix floor as a hardware synth hub for now, but i can still use it for guitar if i want as i'll have the outputs of helix into my jbl's as well via 1/4th cables!
Last edited:
Rock Chalk
Roadie
- Messages
- 817
Axe-Fx III factory presets for Firmware 28.02
The Axe-Fx III factory presets have been updated for firmware version 28.02 or newer. As always, we recommend backing up your current presets before performing any major update or installation...
BROCKSTAR
Roadie
- Messages
- 902
This is what I do majority of the time.
I just take backing tracks from youtube and toss them in the DAW and then record noodlie-noodlies over it and then sync them manually with the video and upload... If that works fine then im all good!
As for my own recordings for my ambient/experimental stuff, im never on time anyway or use click tracks or drums, so going off time during ambient or drones is a must haha
- Messages
- 16,677
I feel like we are all
The good news is seeing this post allowed me to just skim past the last 3 + pages.
Thanks!
Similar threads
- likitlikeyoulikeit
- The Water Cooler
