Two Notes OPUS!!!

nicolasrivera

Roadie
Messages
404
TWO NOTES enters the amp modeling world!!

opus_main.jpg


opus_tsm.jpg


Digital Audio​

AD/DA Converters:
Studio-grade 24-bit / 96 kHz

Bandwidth (-1dB):
30 Hz – 19 kHz

Dynamic Range ratio:
101dB

Internal Processing:
32-bit floating-point

Latency:
2.2 ms (Line Input to Line Output)

Power​

Power input connector:

Connector: 2.1mm x 5.5mm
Polarity: Center negative
Voltage: 12V DC
Current: 200mA
Power consumption: approx. 2W

Input / Output​

Amp/Inst/Line Input:
1/4″ jack unbalanced (TRS)

Input Impedance:
AMP :160kΩ unbalanced / 300kΩ balanced
LINE : 37kΩ unbalanced / 55kΩ balanced
INST. : 1MΩ unbalanced

Max Level (No Input Pad):
AMP: 26.1dBu
LINE: 11.3dBu
INST.: 2.8dBu

Max Level (With Input Pad):
AMP: 36.2dBu
LINE: 20.8dBu
INST.: 12.3dBu

DI Output*:
XLR balanced
Max level: 10dBu
Output Impedance: 600Ω
*Protected against +48V phantom power

Line Output*:
XLR balanced
Max level: 10dBu
Output Impedance: 600Ω
*Not Protected against +48V phantom power

Headphone Output*:
1/8″ (3.5mm) TRS jack
Max output power: 300mW under 100Ω
Output impedance: 33Ω

USB Connector:
USB-C 2.0

Memory Card:
256Mb Micro-SD included Up to 32Gb cards supported





 
Last edited:
No footswitches? I’m guessing it requires telekinesis? The display (scribble strip) actually makes the Boss GT’s look good.

At least tones sound decent.
 
This sounds a whole lot better than their attempt at a tube preamp. Dig the VH tone Pete dialled up.
 
Hi Guys,

Amy from Two notes here! Well, that's a little earlier than we'd planned but we're so glad to hear you're digging OPUS. If you have any questions, let me know! We're happy to help!
I'm definitely eager to see which preamp models this includes when it hits the shelves. ;)

Any plans to:

1) extend the model list via regular firmware updates in the future?

2) sell particular preamp models online, like you're doing with DynIR cabs?

Cheers

EDIT: Nice to see you on here. Finally! :D
 
Last edited:
I'm definitely eager to see which preamp models this includes when it hits the shelves. ;)

Any plans to:

1) extend the model list via regular firmware updates in the future?

2) sell particular preamp models online, like you're doing with DynIR cabs?

Cheers

EDIT: Nice to see you on here. Finally! :D
Hi @dronerstone,

Thank you for the post and the welcome!

There are indeed more preamp models on the way via Free Firmware Updates! At this stage, we're not planning on reselling these, rather we want our legion of tone heads who invest in OPUS to get maximum bang-for-their-buck! :giggle:
 
Hmmmmm ..... I disagree with the comments re: "old" digital and "muddy" wound strings ..... these tones ... to my basic old ears sound like real Amps.

What are you gonna do :)
 
Hi @aivoryuk

There certainly is!
Hi Amy !

=> does this unit have full Midi PC / CC etc...... implementation in it (?) so all the different parameters, amps, amp settings, cabs, cab settings etc.... can all be controlled by an external Midi Device that sends Midi PC / CC etc... (?)

=> is the Power Supply connector a Standard Connector or is it proprietary (?)

=> how big is the external P/S "brick" relative to the size of the unit (?)

Ben
 
This looks interesting. I'm trying to find a product page for it though?
 
Back
Top