The Official Friedman IR-D leaked on GC (thread)?

1000006221.jpg
 
A studio-ready tube preamp packed into a pedal.
The Friedman IR-D puts the signature harmonic richness of an all-tube preamp into a compact, pedalboard-friendly unit. Powered by two 12AX7 tubes, it delivers the responsiveness and complexity you'd expect from a Friedman design. With two independent channels equipped with boost, you can footswitch between four distinct gain stages—from pristine cleans to saturated distortion. Built-in IR cabinet simulation sends your tone direct to a PA or interface, complete with studio-quality mic'ing. The Friedman IR-D provides an intuitive control set without burying key parameters in complex menus. Just plug in, dial in your tone and unleash iconic Friedman sound anywhere your pedalboard goes.

Savor the Tone of Glowing 12AX7 Tubes​

While some preamp pedals use tubes merely to "warm up" their solid-state circuits, the Friedman IR-D is built around two genuine 12AX7 preamp tubes. Running at proper high voltage, these tubes infuse your tone with the touch-sensitivity, harmonic complexity and gain characteristics that define the Friedman sound. The IR-D reacts and responds like a real tube amp, not a simulation. You'll hear—and feel—the difference, from dynamic clean headroom to rich, reactive crunch.

Two Channels Become Four With Independent Boosts​

The Friedman IR-D equips each of its two independent channels with a dedicated boost circuit. Essentially, this gives you four distinct voices to craft your ideal gain staging—from pristine cleans to roaring overdrive. Each boost is highly tweakable via the Friedman Editor software. Access two channels at the stomp of your foot, while the extra boost kicks transform the Friedman IR-D into a versatile tone toolkit. The channels themselves are based on Friedman's famed Dirty Shirley circuits, dialing in those coveted British tones.

Onboard IRs Put World-Class Cab Tones at Your Feet​

Thanks to built-in IR cabinet simulation, the Friedman IR-D consistently delivers studio-quality mic'd up tones no matter where you plug in. It comes loaded with 13 of Dave Friedman's favorite IRs, from classic 4x12s to more exotic combos. Easily select an IR for each channel with the mini toggles. The onboard IRs can be bypassed entirely for use with your own IR loader. Whether recording direct or playing live, the IR-D equips your pedalboard with an arsenal of iconic Friedman cabinets.

Features​

  • Two high-voltage 12AX7 preamp tubes for rich harmonic tone
  • Two independent channels with boost based on Dirty Shirley/Twin Sister circuit
  • Onboard DSP IR cabinet/power amp simulation for studio-quality tone
  • 13 Friedman Cabinet IRs included; load your own IRs via Friedman Editor software
stomp of your foot, while the extra boost kicks transform the Friedman IR-D into a versatile tone toolkit. The channels themselves are based on Friedman's famed Dirty Shirley circuits, dialing in those coveted British tones.

Onboard IRs Put World-Class Cab Tones at Your Feet​

Thanks to built-in IR cabinet simulation, the Friedman IR-D consistently delivers studio-quality mic'd up tones no matter where you plug in. It comes loaded with 13 of Dave Friedman's favorite IRs, from classic 4x12s to more exotic combos. Easily select an IR for each channel with the mini toggles. The onboard IRs can be bypassed entirely for use with your own IR loader. Whether recording direct or playing live, the IR-D equips your pedalboard with an arsenal of iconic Friedman cabinets.

Features​

  • Two high-voltage 12AX7 preamp tubes for rich harmonic tone
  • Two independent channels with boost based on Dirty Shirley/Twin Sister circuit
  • Onboard DSP IR cabinet/power amp simulation for studio-quality tone
  • 13 Friedman Cabinet IRs included; load your own IRs via Friedman Editor software
  • Tubes: 2 x 12AX7 preamp tubes
  • Channels: Two independent identical channels + boost
  • MIDI programmable features: Channel select / Boost, IR select, Thump and Presence, Effects loop ON/OFF, Boost Lock
  • Power amp simulation with software editable Presence and Thump (per channel)
  • Low latency Impulse Response cabinet simulation (bypassable)
  • Three position CAB/IR select switch per channel (programmable via software)
  • 13 free Friedman IRs or load your own
  • Boost Volume and Gain controls (per channel)
  • Volume and Gain controls (per channel)
  • Full EQ consisting of Bass, Middle, Treble (per channel)
  • 2-way Bright switch (Per Channel)
  • 3-way Structure switch (Per Channel)
  • Three multi-function foot switches
  • Ultra-transparent series FX loop (bypassable)
  • TRS balanced output
  • Headphone output
  • MIDI 5 pin standard connector and USB MIDI
  • USB software editor - powered by SYNERGY
  • Limited 3-year Warranty
  • Universal 12V Power Supply Included
  • 6' USB2.0 A Male to B Male cable Included
  • Dimensions (Including Knobs): 5.5" (D) x 6.5" (W) x 2.3 (H)
  • Weight: 1.5 lb.
 
You must log in or register to reply here.

Similar threads

S
Friedman IR-X preamp leaked - XLR, Midi, 2 ch, 2 tubes
Replies
9
Views
1K
southpawdd
southpawdd
vino_buono
Help me choose a plexi tube preamp!
2
Replies
28
Views
1K
vino_buono
vino_buono
Jarick
Friedman IR-X + HX Effects
Replies
15
Views
3K
Jarick
Jarick
vino_buono
Kourbis Plexivibe
Replies
1
Views
149
2112
2112
vino_buono
Power amp modeling
2
Replies
33
Views
2K
Sascha Franck
Sascha Franck
Back
Top