Need a pedal amp - what should I get?

itchyfingers

Roadie
Messages
721
I recently had 2 2x10 cabinets made, and have been running my board into an AC30 (or a Super Reverb TM) and out to the two cabs. I'd like to get a stereo setup going for larger venues, where I set each cab on opposite sides of the stage, but don't wanna hassle with bringing two amp heads. I'm thinking I could split the signal somewhere on the board so that one route goes to the AC30 and the other hits a pedal-sized amp and that routes to the other cab.

Is this do-able? What do you recommend, TGF?
 
BluGuitar Amp 1 Mercury Edition should be a great pairing for that.

I currently use the Iridium Edition together with the Mesa Mark V in a similar rig. Works great.
 
Isn't the Blug like the size of a Volkswagen?
1758646542174.png
 
I am concerned about real estate on the pedalboard, but I suppose I could just sit it on top of the cab...

What is the BluGuitar modeled after? Can I get some sparkly clean tones?
 
Pedaltrain and DIY boards is what I am currently working with, but that Temple amp module is pretty freakin cool.

With this module or the BluGuitar or even these UA amp-in-a-box pedals, do I need to run the to a power amp or can I go direct to the cab?
 
Pedaltrain and DIY boards is what I am currently working with, but that Temple amp module is pretty freakin cool.

With this module or the BluGuitar or even these UA amp-in-a-box pedals, do I need to run the to a power amp or can I go direct to the cab?
The Temple mod is the amp. Obviously want to match cabinet impedance to get full power out of it. It probably doesn't make sense without a Temple board. If you did amp in a box pedal; you would need an actual power amp.
 
Probably not important but I'll share these 2 Ritter units anyway. Heard good things so far - never played one tho.

Keep in mind these are power amps, so you'd need a preamp or modeler.

Both are stereo capable:


and

 
Probably not important but I'll share these 2 Ritter units anyway. Heard good things so far - never played one tho.

Both are stereo capable:


and

The Ritter amp I have pulled out of Kemper is great! Weird form factor that only fits the Kemper but I dig it \m/
 
60W class D, I'm not very convinced this thing's got enough juice, tbh
 
60W class D, I'm not very convinced this thing's got enough juice, tbh
It might not be, but I will say, my Bluguitar Amp 1 keeps up with drummer and band, easily, through a 1x12, on 4 or 5 on the master volume, with the channel volumes on 8, and it doesn’t hit the “60 watt range” on the master volume dial until around 7
 
Back
Top