Line 6 Helix Stadium Talk
- Thread starter laxu
- Start date
EOengineer
Rock Star
- Messages
- 3,980
I noticed this last night. Yanking that thing all the way to the right and hitting the amp with a boost does a thing.
I’m still figuring out that parameter in practice but I can see why they added it. I’m not sure how to describe its effect but it’s subtle until it isn’t.
ejecta
Shredder
- Messages
- 1,387
It’s totally petty to pick on this and not sure why it bugs me but him putting the gear in a stool is just stupid. I mean I get the whole use what you got thing but that’s just hack. There cheap little TV tray stands that wouldn’t be so distracting.
The DSP is still "Recommended for new designs" by Analog Devices and would be considered top-tier compared to even the ADSP-SC587 that's in the FM9 Turbo MKII.
- Messages
- 9,820
I'd say about the same btw.
mavrick102000
Rock Star
- Messages
- 3,524
I've had this happen with the original Helix a few times when I wasn't paying attention. Make sure the output type is correct 1/4", USB, etc. Sometimes, multi can do this if you have multiple connection points and something isn't routed correctly between your interface and your DAW or your signal chain in Stadium in this case.
Last edited:
- Messages
- 9,820
Hmmmmm. Perhaps. I was using SPDIF output type.
JiveTurkey
Goatlord
- Messages
- 22,039
How do you toggle snapshots in command center? From the couple of videos I watched; you are able to set it up to jump back to the previous snapshot by pressing the button again. I set up a stomp row and assigned snapshots to that row. I want to be able to toggle back to the last snapshot by pressing the button again but I can't seem to get it to work that way 
bucephalus
Roadie
- Messages
- 620
Spend a little of your YouTube bucks already you douche nozzle
Baba
Shredder
- Messages
- 1,678
Damn man, if I had some time today, I’d get you on the phone to walk through it, but I don’tHow do you toggle snapshots in command center? From the couple of videos I watched; you are able to set it up to jump back to the previous snapshot by pressing the button again. I set up a stomp row and assigned snapshots to that row. I want to be able to toggle back to the last snapshot by pressing the button again but I can't seem to get it to work that way
The YouTube vids can probably explain it better than me, but the gist is, in command center, set an assignment to a footswitch, (WHEN ON snapshot 1, for example), to go to snapshot 2, and on that same switch, WHILE ON snapshot 2, set an assignment to go to snapshot 1.
I just did this a few weeks ago, but it did take some time, patience, and a clear head.
Baba
Shredder
- Messages
- 1,678
What is Z PrePost in the real world?
- Messages
- 9,820
"Determines the location of speaker impedance characteristics in the power amp, primarily due to negative feedback. High values mean the effects of the interaction appear at the output of the power amp (post) and lower values mean more of the effect is fed back to the input of the power amp (pre). "Stock" represents the stock location, which changes from amp to amp."
Baba
Shredder
- Messages
- 1,678
I was actually going to ask this next
JiveTurkey
Goatlord
- Messages
- 22,039
It has noise with the Mk V. Haven't tried it with the Rectifier and to be fair; all I have to try it with are Mesa amps. So not a wide sample set to look at.I was actually going to ask this next
JiveTurkey
Goatlord
- Messages
- 22,039
I think I am looking at this specific bit the wrong way. It's not honestly an issue and I can work around it. This is what it shows in Command Center for "Toggle" assignmentsDamn man, if I had some time today, I’d get you on the phone to walk through it, but I don’t
The YouTube vids can probably explain it better than me, but the gist is, in command center, set an assignment to a footswitch, (WHEN ON snapshot 1, for example), to go to snapshot 2, and on that same switch, WHILE ON snapshot 2, set an assignment to go to snapshot 1.
I just did this a few weeks ago, but it did take some time, patience, and a clear head.
There is no "Toggle" destination setting. Like if I wanted Stomp A11 to toggle between Snapshot 1 and 3.
MirrorProfiles
Rock Star
- Messages
- 4,794
Been doing some comparisons with @Orvillain , he's got the 2203 sounding pretty indistinguishable to the Fractal model of it.
I did some ramps through my 2203 (and also HX Native and another plugin model). If any stadium folk fancy trying to match these tones, I can send DI's and the IR used. Can include the HX Native settings I used too. It's just amp with no pedals or other processing. IR is loaded externally as its a bit longer than 2048 samples.
https://samply.app/p/reERJ3jali9Xe6945bUZ?si=J0UMGf38XHOuODMXmQKCeM3zX2d2
I did some ramps through my 2203 (and also HX Native and another plugin model). If any stadium folk fancy trying to match these tones, I can send DI's and the IR used. Can include the HX Native settings I used too. It's just amp with no pedals or other processing. IR is loaded externally as its a bit longer than 2048 samples.
https://samply.app/p/reERJ3jali9Xe6945bUZ?si=J0UMGf38XHOuODMXmQKCeM3zX2d2
paisleywookiee
Rock Star
- Messages
- 8,920
Dropbox
www.dropbox.com
Stadium versus Axe FX III. 2203MV - High gain input. Same IR. Dialled in to taste.
Are we supposed to do the Pepsi Challenge, or is the Stadium A? They both sound awesome. But we already knew the FAS is great sound-wise.
- Messages
- 9,820
Do what you like Wookz. I'm off the pub.
paisleywookiee
Rock Star
- Messages
- 8,920
I’d like to know which is which, so I can proclaim which modeler is objectively the best evar, and diminish the other product greatly.
