Line 6 Helix Stadium Talk

[JiveTurkey]

One of the setlists in OG Helix had a couple banks of templates for 4cm, 7cm, etc. there might be something in there already.

I looked in the factory presets but wasn't seeing anything. There is a lot of things I have missed on a lot of fronts so playing a bit of HX catchup. The channel switching is going to be interesting. I hope

 

[mikah912]

@JiveTurkey There's not a 4-cable method preset, BUT there is a template you can select. From the manual:

1. Tap Menu
   
   
   
   
   in the upper left corner of the touchscreen and then tap New Preset
   
   
   
   .The Select Template window appears (below left).
   
   
2. Tap the desired template from which you want to start your new preset. If you’re not sure, tap “Empty Preset.”
3. Tap New Preset
   
   
   
   
   .A new preset is created based on the template you chose (below right).

You just need to select the "4-Cable Method" template.

 

[ejecta]

Right, got some time now. Here's my first clip. It is high gain. EV Panama Red, into one of my own IR's:

Dropbox

www.dropbox.com

Sounds good and nice riff!

 

[Orvillain]

@Orvillain Did you try it with the Mk V? I am as we speak and it sounds verrrrrrrrrry nice in 4CM. I am getting a ibt of noise but I am sure I don't have something optimized> I haven't set up channel switching yet. Yet.

Not tried any 4cm stuff yet. Not with the Mark V, gotta fix the power switch first!

 

[JiveTurkey]

@JiveTurkey There's not a 4-cable method preset, BUT there is a template you can select. From the manual:

1. Tap Menu
   
   
   
   
   in the upper left corner of the touchscreen and then tap New Preset
   
   
   
   .The Select Template window appears (below left).
   
   
2. Tap the desired template from which you want to start your new preset. If you’re not sure, tap “Empty Preset.”
3. Tap New Preset
   
   
   
   
   .A new preset is created based on the template you chose (below right).

You just need to select the "4-Cable Method" template.

Thank you sir! Only twitch on this is you still have an instrument vs. line level discrepancy in what you are sending the input vs. what is coming back to the Stadium return. I am going to do some digging and maybe rethinking some of the cabling. It might make sense for OCD sake for me to set the Output 1 to instrument and use it to send to the amp input then use the loop like you are showing with the existing cables I am using.

 

[JiveTurkey]

Not tried any 4cm stuff yet. Not with the Mark V, gotta fix the power switch first!

Crap I forgot! Mojo sent on that endeavor!

 

[Orvillain]

I don’t think they are applying modulation to the input/output of the reverb,

You can modulate the convolution process itself. You don't need to just slap modulation on the input or output.

 

[mikah912]

You can modulate the convolution process itself. You don't need to just slap modulation on the input or output.

I think that's what Hotone is doing with their Verbera convolution reverb pedal. I think it's cool as hell.

 

[JiveTurkey]

Changed up my cabling and much better. It is a lot of wasted signal chain real estate though. There is probably a way to arrange the preset better but I will circle back. Good results so far.

 

[Orvillain]

Dumb question time - is there any way to just scroll through IR's in the current folder, one-by-one ?? I tried turning the bottom right encoder, and it just scrolled to the Kinky Boost and made a very kinky sound.

 

[ejecta]

I think that's what Hotone is doing with their Verbera convolution reverb pedal. I think it's cool as hell.

Would be nice if the Stadium would allow you to load convolution reverbs into it. @Digital Igloo

 

[JiveTurkey]

Just connected a TRS cable to the Mk V and it is super noisy for channel switching. Not sure what the issue is or if there is a caveat/fix/know method for making this work without the additional noise.

 

[Orvillain]

Y'know what, listening back to those clips, I don't hate the reverbs. I just want more of them, that are more my flavour. But they're definitely useable.

 

[wharf rat]

Here's a clean ambient-ish thing, using US Super Vib, Adriatic Delay in stereo, and Dynamic Hall in stereo:

Dropbox

www.dropbox.com

I'm going to be honest, and kinda forthright.... I don't really like the Helix reverbs. Like, at all. There isn't a single one in there that gives me the horn. I'm definitely going to need to add verbs in the loops.

Adriatic Delay is as beautiful as ever.

Sounds fucking nuts to me dude. Nice.

 

[Orvillain]

Just connected a TRS cable to the Mk V and it is super noisy for channel switching. Not sure what the issue is or if there is a caveat/fix/know method for making this work without the additional noise.

Dang. Was afraid of that. Looks like my Orchid isolator boxes aint going anywhere brah!!

 

[ejecta]

Just connected a TRS cable to the Mk V and it is super noisy for channel switching. Not sure what the issue is or if there is a caveat/fix/know method for making this work without the additional noise.

The old Helix had noise issues with grounding when using it to switch channels on an amp. Hope that’s not still the case with the new unit.

 

[JiveTurkey]

Dang. Was afraid of that. Looks like my Orchid isolator boxes aint going anywhere brah!!

The old Helix had noise issues with grounding when using it to switch channels on an amp. Hope that’s not still the case with the new unit.

I've got TRS cable on C/D control on the HX end and then using a splitter to control channel switching and solo boost engage on the Mark end (ring and tip). I have it set to start up on channel 2 then the switch will switch from 2 to 3. How much of a kludge is an isolator box?