Nice! Sadly I have to send mine in for repair. One of the encoders has been wonky from the beginning. That means about two weeks without the VP4
VP4 Firmware V4.01 Release
The VP4 Firmware V4.01 Release is now available for download: VP4 Firmware V4.01 Release The supporting VP4-Edit can be downloaded here: VP4-Edit 1.01.06 IMPORTANT: Always back up your Presets and System using Fractal-Bot built into AM4-Edit before updating firmware VERSION 4.01 | January...forum.fractalaudio.com
Fractal Audio Systems VP4 - Virtual Pedalboard
- Thread starter laxu
- Start date
iaresee
Roadie
- Messages
- 887
Yes
SillyOctpuss
Rock Star
- Messages
- 4,050
Yeah you're totally fine.
- Messages
- 534
- Messages
- 12,972
No way, I cook that stuff up with a spoon and boot it up. Keeps my blood fresh and you get a CRAZY buzz.
SillyOctpuss
Rock Star
- Messages
- 4,050
BROCKSTAR
Shredder
- Messages
- 1,932
Boudoir Guitar
Rock Star
- Messages
- 5,711
What a mean person on the internet might say: "Fractal: if you ego is so small your head can fit in this bag..."
Mongillo19
Rock Star
- Messages
- 7,368
The vines always get me
iaresee
Roadie
- Messages
- 887
The candy is a G66 thing. Can't encourage that in the USA. We're all too f'ing fat already.
iaresee
Roadie
- Messages
- 887
Your high school sex ed teacher would be so disappointed you didn't make that fit.
sashimi
Roadie
- Messages
- 836
Lol, careful, this same tone tip got Mike Fuller cancelled
- Messages
- 10,225
iaresee
Roadie
- Messages
- 887
Mmm. Baby back baby back baby back ribs.
- Messages
- 12,972
Someone told me once that my apartment looked like Poison Ivy’s lair as if that was a bad thing. There were real vine plants on a wall in the living room, before I killed them in the last few months, that kinda removed the fake-vine aspect of the fake ones. Gotta re-plant them with some food, those things never truly die.
There’s a 2nd function to all the vines and LED lighting, but that requires hallucinogens.
- Messages
- 12,972
Since I need to wait a bit to get my board wired up (
) I figured I’d just play around with the VP4 for a bit and learn it before jumping into programming it with the Morningstar stuff. I was definitely cocky assuming I’d jump right on the VP4 in 4CM the first time I turned it on. 
As always, @2112 can be counted on to have a video covering the function you’re looking for and once that was 4CM was turned on in the setup menu, THEN I jumped right into the VP4 in 4CM without watching/reading anything else.
It’s interesting; I’ve never once felt compelled to learn the front panel of my III or FM9 and have always gone with the software editor without a second thought, but I haven’t even downloaded the VP4 editor and this is the first time I’m giving it a thought. I’m sure I’ll end up using it, but I thought it was interesting how it seemed natural to learn the on-unit controls right away.
Hahahah I had a preset with the analog delay loaded when I was testing the 4CM and thought something was wrong because I couldn’t get the repeats/mix cranked nearly the same as I can when I dial in my presets on the III or FM9, but once I changed delays I was good to go and after that everything worked and sounded as expected; badfuckingass.
I think I’m going to use the Drives a lot more than I expected to, everything I’ve used so far with the Plexi50 has been great. And the compressors, both of which will free up some spots in my ML5 for something else. The Freqout would be nice to add to this board.
) I figured I’d just play around with the VP4 for a bit and learn it before jumping into programming it with the Morningstar stuff. I was definitely cocky assuming I’d jump right on the VP4 in 4CM the first time I turned it on. As always, @2112 can be counted on to have a video covering the function you’re looking for and once that was 4CM was turned on in the setup menu, THEN I jumped right into the VP4 in 4CM without watching/reading anything else.It’s interesting; I’ve never once felt compelled to learn the front panel of my III or FM9 and have always gone with the software editor without a second thought, but I haven’t even downloaded the VP4 editor and this is the first time I’m giving it a thought. I’m sure I’ll end up using it, but I thought it was interesting how it seemed natural to learn the on-unit controls right away.
Hahahah I had a preset with the analog delay loaded when I was testing the 4CM and thought something was wrong because I couldn’t get the repeats/mix cranked nearly the same as I can when I dial in my presets on the III or FM9, but once I changed delays I was good to go and after that everything worked and sounded as expected; badfuckingass.
I think I’m going to use the Drives a lot more than I expected to, everything I’ve used so far with the Plexi50 has been great. And the compressors, both of which will free up some spots in my ML5 for something else. The Freqout would be nice to add to this board.
- Messages
- 12,972
The Keeley Comp+ and Lovepedal Vibronaught are coming off the board.
Those comps are way too fucking good to not use and while I’m still going to hunt for a vibe (that might not even exist) I was digging the FAS Vibe more than the Lovenaught. I’m going to put the Freqout on the board instead of the Comp and I was considering putting the VP4 Input side in a loop but I can’t think of any time I’ll use it after the dirt pedals and the Right side needs to go to an effects loop.
Man, when I got to those Dynacomps I melted. Playing with a compressor is a new thing for me and I’ve only been using that Keely Comp+, the only time I’ve used compressors in the AxeFX was when I was dialing in Gilmour tones a while back. The dynamic differences between playing into a real cab and studio monitors really comes into play here, but through studio monitors the lessening of dynamics is so much more apparent using a compressor than it is through a real cab and just switching through the different compressors, I definitely just realized how people can get the compressor bug in the guitar world.
I said this at the FAS forum, but I definitely got the complete Fractal experience by ordering a Fractal product on Monday, having it show up Friday and it already has an update waiting for it while it replaced existing gear in a no-brainer fashion. You’d think after what I already own I’d have known but I really didn’t utilize the 4CM setup to its full extent when using the FM9 with my EVH head. I’m about ready to plow through the dirt pedals because those are all going to be quite different through a cab than monitors as well.
Those comps are way too fucking good to not use and while I’m still going to hunt for a vibe (that might not even exist) I was digging the FAS Vibe more than the Lovenaught. I’m going to put the Freqout on the board instead of the Comp and I was considering putting the VP4 Input side in a loop but I can’t think of any time I’ll use it after the dirt pedals and the Right side needs to go to an effects loop.
Man, when I got to those Dynacomps I melted. Playing with a compressor is a new thing for me and I’ve only been using that Keely Comp+, the only time I’ve used compressors in the AxeFX was when I was dialing in Gilmour tones a while back. The dynamic differences between playing into a real cab and studio monitors really comes into play here, but through studio monitors the lessening of dynamics is so much more apparent using a compressor than it is through a real cab and just switching through the different compressors, I definitely just realized how people can get the compressor bug in the guitar world.
I said this at the FAS forum, but I definitely got the complete Fractal experience by ordering a Fractal product on Monday, having it show up Friday and it already has an update waiting for it while it replaced existing gear in a no-brainer fashion. You’d think after what I already own I’d have known but I really didn’t utilize the 4CM setup to its full extent when using the FM9 with my EVH head. I’m about ready to plow through the dirt pedals because those are all going to be quite different through a cab than monitors as well.
