Two-pedal pedalboard

i have a three knob version of this
Love the 3 knob versions too. It was my first ever drive pedal. Still have it. Not quite as robust as the big brothers but still sweet tones. I have 2 of the big ones as well. BK still makes them as far as I know?
 
I remembered I had read that some phasers can imitate rotating speakers. Does this one do it?
Well I guess it does a decent facsimile thereof. However I use a real Leslie G27 rotating cab, so I'm the wrong person to ask.

Leslie.jpg
Leslie-back.jpg
 
Love the 3 knob versions too. It was my first ever drive pedal. Still have it. Not quite as robust as the big brothers but still sweet tones. I have 2 of the big ones as well. BK still makes them as far as I know?
A former bandmate gave it to me when he was downsizing. I never used it much but kept it because it sounded good and seemed unique. If they still make them I guess not, lol
 
Sorry. I should have asked this earlier.

What does the additional footswitch mounted on the ibanez delay do?
It is called a infinite feedback mod done by Keeley when the pedal was new. When you step on the switch the delayed signal repeats indefinitely
 
I am assuming pedals like this one simulate a rotating speaker, upto an extent. They are portable too.

But real leslies always sound so good.
 

Attachments

  • 99d4bdab79TGw0uXdFNFcjS3N4DFtd1RkL7GhSZ1.jpg
    99d4bdab79TGw0uXdFNFcjS3N4DFtd1RkL7GhSZ1.jpg
    68.1 KB · Views: 0
I think an MXR Phaser can do a reasonable facsimile of a Leslie on the cheap.
Just a great effect for adding some subtle texture and movement without
throwing your timing off like a delay pedal can.

Phase 95 gets a lot of love and is fairly cheap and easily found all across the
Globe. Ok, maybe not Antarctica. :LOL:
 
Tremolo and Phaser can get close, but there's a few Leslie pedals out there.

For a small, clean tube amp on the cheap maybe a (used) Vox AC10C? Crowther Hot Cake to go with it.
 
If it was really just two non-programmable pedals and a single channel pedal platform amp, I'd likely go for either an OCD (or clone), a JRockett "The Dude" (which I absolutely happen to love) or maybe even an ODR-1 (would possibly buy the new version with dedicated bass control) on the dirt side and possibly a NUX Atlantic because it has delay and reverb in one pedal (I'd vastly prefer a Source Audio Collider, but that's programmable).
Ah well, as I usually want at least a simple boost here and there, I might perhaps get a different dirt pedal as well, featuring on/off and boost switches.
 
We still don't know what guitar and amp the OP is using with his Polytune and SD-1.

If any, hence the later wish for a tube amp and earplugs. :idk

I am a woman.

I play an hardtail HSS strat into a 5 watt supro amp.

However, I created this thread to find out two pedals which others would use with their guitar and amp.

I have a habit of rambling, sorry for that.

I have a weakness for loud, clean tube amps. I will use earplugs so that I could listen to them without going deaf :)
 
I think an MXR Phaser can do a reasonable facsimile of a Leslie on the cheap.
Just a great effect for adding some subtle texture and movement without
throwing your timing off like a delay pedal can.

Phase 95 gets a lot of love and is fairly cheap and easily found all across the
Globe. Ok, maybe not Antarctica. :LOL:

It feels challenging to incorporate a leslie speaker or such a pedal into our rigs, because it will probably be used momentarily and will have to be switched on and off. Unless it is being used for an original song. I appreciate those who use rotating speakers and relevant simulator pedals. It is never easy to tap dance.
 
Tremolo and Phaser can get close, but there's a few Leslie pedals out there.

For a small, clean tube amp on the cheap maybe a (used) Vox AC10C? Crowther Hot Cake to go with it.

A forum member who had replied me on here was looking into small tube amps to be bought for Christmas.

Thank you for suggesting a small VOX amp to him.
 
I am a woman.

I play an hardtail HSS strat into a 5 watt supro amp.

However, I created this thread to find out two pedals which others would use with their guitar and amp.

I have a habit of rambling, sorry for that.

I have a weakness for loud, clean tube amps. I will use earplugs so that I could listen to them without going deaf :)
Sorry! My bad entirely. :bonk

I assume the Supro has reverb. When 1 pedal is a tuner that kinda limits the other options, especially if you don't care for adjusting them on the fly.

The Boss SD-1 is a classic for a reason, as are Klones, or a RAT if you are looking for some extra Gain. I don't know Supro amps, but they have a great reputation.

From elsewhere online, they seem to like Fuzz. A DOD Carcosa is a good, inexpensive intro to Fuzz.
 
Last edited:
Sorry! My bad entirely. :bonk

I assume the Supro has reverb. When 1 pedal is a tuner that kinda limits the other options, especially if you don't care for adjusting them on the fly.

The Boss SD-1 is a classic for a reason, as are Klones, or a RAT if you are looking for some extra Gain. I don't know Supro amps, but they have a great reputation.

It's all right.

It's hard for me to tune with clip on tuners, as I play covers in bars with background noise.

I love my amp.
 
Well I guess it does a decent facsimile thereof. However I use a real Leslie G27 rotating cab, so I'm the wrong person to ask.
My comment here is only to show that I can't give an objective opinion on using a EHX Small Stone for rotary sounds because I don't use pedals for rotary sounds. However if that is a sound you're looking for, a lot of people do use pedals for rotary sounds.
It feels challenging to incorporate a leslie speaker or such a pedal into our rigs, because it will probably be used momentarily and will have to be switched on and off. Unless it is being used for an original song. I appreciate those who use rotating speakers and relevant simulator pedals. It is never easy to tap dance.
Yes a Leslie speaker cab is not necessarily a good practical solution. They're heavy. However when you turn off the rotating speaker it becomes a regular guitar cab and can be used for "standard guitar amp" sounds without the rotating speaker.
A forum member who had replied me on here was looking into small tube amps to be bought for Christmas.

Thank you for suggesting a small VOX amp to him.
A small lightweight amp that serves me well and is easy to carry at 20 lbs. is a Fender '68 Vibrochamp Reverb. Even though it has '68 in the name, it is a current amp. They're all tube 5 watt, have a 10" speaker with a great clean sound. The best features are a built in good digital reverb and a great sounding tube driven tremelo. That's two less pedals to carry. The only thing about this amp is, give it 2 or 3 weeks of playing it every day to break in and it will sound much better. I use it for clean jazz, and country rock. But it has a nice sound when you push it into breakup too.

Good luck with your search for the pedals that work for you.
 
Last edited:
My comment here is only to show that I can't give an objective opinion on using a EHX Small Stone for rotary sounds because I don't use pedals for rotary sounds. However if that is a sound you're looking for, a lot of people do use pedals for rotary sounds.

Yes a Leslie speaker cab is not necessarily a good practical solution. They're heavy. However when you turn off the rotating speaker it becomes a regular guitar cab and can be used for "standard guitar amp" sounds without the rotating speaker.

A small lightweight amp that serves me well and is easy to carry at 20 lbs. is a Fender '68 Vibrochamp Reverb. Even though it has '68 in the name, it is a current amp. They're all tube 5 watt, have a 10" speaker with a great clean sound. The best features are a built in good digital reverb and a great sounding tube driven tremelo. That's two less pedals to carry. The only thing about this amp is, give it 2 or 3 weeks of playing it every day to break in and it will sound much better. I use it for clean jazz, and country rock. But it has a nice sound when you push it into breakup too.

Good luck with your search for the pedals that work for you.

I don't think I will ever part with my SD-1 or tuner.

It is nice to know which two pedals others will chose with their guitar and amp.
 
Back
Top