Line 6 Helix Stadium Pre-Launch Discussion

Being able to custom map out by dragging and writing a "path". Then assigning to an expression pedal.
Cued up in the vid although it doesn't claim to be able to do that:



At 12:27 DI shifts over to the 2nd page of amp parameters menu and there is a “Z PrePost” parameter. I’m assuming that’s the setting for cab impedance curve?
 
At 12:27 DI shifts over to the 2nd page of amp parameters menu and there is a “Z PrePost” parameter. I’m assuming that’s the setting for cab impedance curve?
The value might interpolate how much of the impedance coloration is applied at the input (preamp) versus the output (power amp/speaker)???
 
The helix has that too no?
it does not. I found this earlier in the thread.

None of these are precluded by how we've built Agoura, although we might want to approach one or two in a different way. Plus, all Agoura amps have a new Z PrePost parameter that lets you choose the location of speaker impedance characteristics in the power amp, primarily due to negative feedback.
 
At 12:27 DI shifts over to the 2nd page of amp parameters menu and there is a “Z PrePost” parameter. I’m assuming that’s the setting for cab impedance curve?
From the parameter panel:

PrePost determines the location of speaker impedance characteristics in the power amp, primarily due to negative feedback. Higher values mean the effects of the interaction appear at the output of the power amp (Post) and lower values mean more of the effect is fed back to the input of the power amp (Pre). "Stock" represents the stock location, which changes from amp to amp.
 
Ah cool thanks. Actually though, someone had a png of every existing modeler and how they overlap, like Fractal, etc

Always happy to serve 🫡

screenshot-from-2025-06-12-11-48-09-png.46410
screenshot-from-2025-06-12-11-48-32-png.46412
 
I like the idea of elevating it, but I am so out of desk space. I may have to get a laptop stand like the one I use for my mini-keyboard
Yeah I recently put 2 monitors on my desk for work and I just don't have the room. Such a trivial problem but alas
 
Alas can't seem to order that from UK, or see it.
 
I posted this before, but I think this is where I will end up. Helix Stadium XL, RV-5, Nemesis ADT, Golden, MercuryX, and my bb535 wah, all on my Pedaltrain XD24. Volume off to the side.

Each pedal in a loop. Each loop in a parallel path. Each parallel path with a noise-gate on it to kill the noise floor whenever the FX loop block isn't engaged. Let's me leave the returns wide open for trails coming from the pedals.

1759096276873.png
 
Back
Top