Dimiguitar
Roadie
- Messages
- 492
How many IRs do you have saved on the III?
Fractal Talk
- Thread starter laxu
- Start date
- Messages
- 9,911
753. Across about 4 cabs, with a 421 and 57 for each cab, in multiple positions.
These are basically dyna-packs, in a big list. For all intents and purposes. I do typically only use about 10 of these. But it is nice to have options.
Dimiguitar
Roadie
- Messages
- 492
Jesus Christ
- Messages
- 9,911
He'd probably just stick with the old GuitarHack IR's from the Sneap forums.
AlbertA
Shredder
- Messages
- 1,449
Hah I still have all those GuitarHack IRsHe'd probably just stick with the old GuitarHack IR's from the Sneap forums.
- Messages
- 9,911
AlbertA
Shredder
- Messages
- 1,449
It’s like the MySpace of IRsMe too. They're crap!
laxu
Rock Star
- Messages
- 8,265
Totally agree. I also feel like companies went overkill for the movable mic systems.
I used the one Hotone offers on the Ampero 2 and it's basically this:
- Mic type, or multiple mic mix (SM57+121 etc).
- Position with maybe like 5-6 options in a list starting from center, ending at the edge of cone.
MirrorProfiles
Rock Star
- Messages
- 4,801
I’m pretty happy to have the moveable mic options there. If there is an element of balancing available storage, I think I’d like to have the option of which mics and speakers get added. Because there’s probably a lot of mics that I’m simply not going to need to use on the device and don’t need them taking up room on there.
I’d much rather use available space for higher resolution IR’s than compromising just to fit in a load of data I don’t need.
But I’m also not totally sold on any companies methods for blending IR’s together with how they’re pre-processed but that’s another issue.
I’d much rather use available space for higher resolution IR’s than compromising just to fit in a load of data I don’t need.
But I’m also not totally sold on any companies methods for blending IR’s together with how they’re pre-processed but that’s another issue.
Piing
Shredder
- Messages
- 1,652
KHAAAAAAANNNNNNN!!!!!!!!
Shredder
- Messages
- 1,688
I have quite a few York Audio packs, so the user IR spots on the FM9 are mostly full. But after playing around with different cabs and mics I could probably get everything I need out of 20 IR's from each pack.
Dyna Cabs are cool but I never seem to get what I like for higher gain tones. And for me high gain is 800's and juiced up plexi's. Not REAL high gain. I don't chug...
I think it's cool that Cliff was able to fit this feature on devices that were developed years before dyna-cabs were invented.
I don't think that the people complaining that the on device options are limited are giving fair appreciation of how impressive it is that we get them at all.
Dyna Cabs are cool but I never seem to get what I like for higher gain tones. And for me high gain is 800's and juiced up plexi's. Not REAL high gain. I don't chug...
I think it's cool that Cliff was able to fit this feature on devices that were developed years before dyna-cabs were invented.
I don't think that the people complaining that the on device options are limited are giving fair appreciation of how impressive it is that we get them at all.
- Messages
- 1,632
Axe-Fx III Firmware 31.01 Beta
https://www.fractalaudio.com/downloads/firmware-presets/axe-fx-3/31p0/axefxiii_dsp_rel_31p01_beta1.zip NOTE: This firmware requires installation of Dyna-Cabs version 1.09 if upgrading from firmware prior to 30.00. Refer to the Dyna-Cab Installation Guide for details. Be sure to install the...
Axe-Fx III Firmware Release Notes
31.01
Added “Deluxe 6G3” amp model based on the bright channel of a 6G3 “Brownface” Deluxe.
Added “Citrus Juicer” Compressor model based on a Dan Armstrong Orange Squeezer. Unlike the Orange Squeezer the model allows you to adjust the compression ratio and threshold independently and also features Emphasis, Drive and Tone controls. The ratio and threshold of the actual pedal vary with the particular JFET used and the internal bias trim. Set the Threshold to -26.0 dB and Compression to 8.0 as a starting point and adjust to taste.
Added “Half-Wave” Detector Type to Compressor block. This is similar to the Peak type except the rectifier is half-wave as opposed to full-wave. This alters the attack and release ballistics and can add a bit more grit to the sound.
Added warning if system clock frequency is incorrect (e.g. when using AES/SPDIF as the clock source and the clock is at 44.1 kHz instead of 48 kHz).
Improved Amp block preamp modeling (again). This yields more accurate behavior when the amp input is pushed (e.g., when using an internal or external overdrive/boost).
Went through every model with a fine-toothed comb and adjusted power amp parameters as needed to reflect new modeling.
Fixed instability in Pi Fuzz model for certain values of Sustain.
Fixed wrong time constant in Herbie models (probably not audible).
Various other fixes and improvements.
JiveTurkey
Goatlord
- Messages
- 22,066
If we could do that;I don't use dyna cabs and wouldn't mind having the option to delete some to speed up the boot.
AlbertA
Shredder
- Messages
- 1,449
paging @brianwahl - you should check this out
Dimiguitar
Roadie
- Messages
- 492
Did they compare to real amp or?Yesterday on the Worship channel I don’t think Fractal handles a boost upfront as well as stadium
Cliff
brianwahl
Groupie
- Messages
- 23
Will do! I love how Fractal just keeps pushing the envelope with FW amp modeling updates?
I assume this is also in response to my comments about Line 6 Stadium Agoura models compared to Fractal models when it comes to big reverb/driven tones into amps?
Last edited:
- Messages
- 466
No. I don't follow those worship channels. I don't follow any Facebook pages anymore.Will do! I love how Fractals just keeps pushing the envelope with FW amp modeling updates?
I assume this is also in response to my comments about Line 6 Stadium Agoura models compared to Fractal models when it comes to big reverb/driven tones into amps?
