Fractal Talk

[- ★ - BROCKSTAR - ★ -]

The device on the receiving end of the SP/DIF needs an external world clock source. If you have the FM9 set to receive the SP/DIF signal from the VP4 it will also want a clock source from the VP4. Similarly, the VP4 will want to see a clock source from the FM9 since it is receiving a digital signal on the SP/DIF input. That is where the issue lies. Neither device can provide the clock source while set to receive an external SP/DIF signal.

Ok then I'll try the original way I was thinking "If i go spdif from fm9 to spdif on vp4, then take the outs from vp4 into the IN2 on fm9... That should work once i set the ins and outs right in each machines globals."

 

[OrganicZed]

Ok then I'll try the original way I was thinking "If i go spdif from fm9 to spdif on vp4, then take the outs from vp4 into the IN2 on fm9... That should work once i set the ins and outs right in each machines globals."

There's no harm in trying the fully digital method if you want. The VP4 may behave differently than the FM9 / Axe-FX III.

 

[- ★ - BROCKSTAR - ★ -]

I velcro'd my expression pedal to the side of my fc-6 So it's easier to move around with it lol.

However I wish I would have gotten a expression pedal that didn't have the trs cable attached, so that I could use a shorter one into fc-6 instead, but am not sure how that works yet.

If I use expression pedal in the pedal 1 input on fc-6, does that override the PDL1 input on fm9 or does that mean someone could have 7 expression pedals going at once? Four in the fc-6 and 3 in fm9? Geez if that is the case lol.

I ordered another nektar exp controller! Going to put it on the right side! 2 exp controllers is enough!

 

[OrganicZed]

I velcro'd my expression pedal to the side of my fc-6 So it's easier to move around with it lol.

However I wish I would have gotten a expression pedal that didn't have the trs cable attached, so that I could use a shorter one into fc-6 instead, but am not sure how that works yet.

If I use expression pedal in the pedal 1 input on fc-6, does that override the PDL1 input on fm9 or does that mean someone could have 7 expression pedals going at once? Four in the fc-6 and 3 in fm9? Geez if that is the case lol.

I'll probably do the same to the other side lol. 2 is enough!

View attachment 42095

It does not override the pedal inputs on the FM9. The pedal inputs on the FC act as additional expression pedal inputs, so you could have seven expression pedals connected at the same time if you wanted to.

 

[Alex Kenivel]

 

[Alex Kenivel]

Axe FX II XL is back in Guitar Center's possession. I called the store who shipped it to me and they said it was a mispull by a new guy and they indeed had the Axe III ready to overnight to me after they had confirmed the return.


Hopefully tomorrow

 

[duzie]

Axe FX II XL is back in Guitar Center's possession. I called the store who shipped it to me and they said it was a mispull by a new guy and they indeed had the Axe III ready to overnight to me after they had confirmed the return.


Hopefully tomorrow

 

[- ★ - BROCKSTAR - ★ -]

Man I am having so much fun with fractal! Learning about modifiers and stuff right now. Still not sure what external 1 - 16 means yet, or manual 1 - 5. Will have to break out the manual to figure those out.

It's fun trying to set a delay to come on when you attack a little harder then usual using the envelope follower etc.

 

[State of Epicicity]

Man I am having so much fun with fractal! Learning about modifiers and stuff right now. Still not sure what external 1 - 16 means yet, or manual 1 - 5. Will have to break out the manual to figure those out.

It's fun trying to set a delay to come on when you attack a little harder then usual using the envelope follower etc.

Because the Fractal units have so many manuals, one for the modeler, one for the blocks guide, one for the FC, one for the FC footswitches, and one for the tonematch function, I just took all of them and combined them to a single pdf that I could search so I didn't have to remember where to search for a particular keyword; it's helped a lot!

 

[duzie]

Man I am having so much fun with fractal! Learning about modifiers and stuff right now. Still not sure what external 1 - 16 means yet, or manual 1 - 5. Will have to break out the manual to figure those out.

It's fun trying to set a delay to come on when you attack a little harder then usual using the envelope follower etc.

Not sure if you have seen this before
Thought I’d put it out there.

 

[- ★ - BROCKSTAR - ★ -]

Because the Fractal units have so many manuals, one for the modeler, one for the blocks guide, one for the FC, one for the FC footswitches, and one for the tonematch function, I just took all of them and combined them to a single pdf that I could search so I didn't have to remember where to search for a particular keyword; it's helped a lot!

Can you send to me?

 

[- ★ - BROCKSTAR - ★ -]

Not sure if you have seen this before
Thought I’d put it out there.

Actually just watched that last night, or maybe this morning when laying in bed! Love Leons videos!

 

[blandified]

Hey all,

I've mentioned this in passing I think, but wanted to bring it up again. I really prefer my reverb BEFORE my amp because it really captures that classic P&W sound with the reverb distorting from the amp. I LOVE this with my clean tones, and with my Fractal I couldn't be happier.

However, I haven't quite found what I'm looking for in terms of higher gain sounds using this method. Which would be a clean-ish amp and an OD pedal giving me most of my gain. The high gain amps sound and feel amazing, and exactly what I'm looking for, but I can't have my reverb before my amp if the amp is a high gain amp. So I need to stick with my clean amp with reverb before it, and get my high gain sound with an OD pedal out in front.

TLDR: What are your best mid to high gain and screamin' lead sounds with an OD pedal into clean-ish amp in the Fractal?

 

[State of Epicicity]

Can you send to me?

Mine is for the Axe-FX III and FC12. I think you've got other units. Just let me know everything you have and I'll put one together for you, no problem!

 

[- ★ - BROCKSTAR - ★ -]

Mine is for the Axe-FX III and FC12. I think you've got other units. Just let me know everything you have and I'll put one together for you, no problem!

fm9 turbo mk2, fc-6 mk1

I'm not sure how to combine them but that would be nice to do

 

[DLC86]

Hey all,

I've mentioned this in passing I think, but wanted to bring it up again. I really prefer my reverb BEFORE my amp because it really captures that classic P&W sound with the reverb distorting from the amp. I LOVE this with my clean tones, and with my Fractal I couldn't be happier.

However, I haven't quite found what I'm looking for in terms of higher gain sounds using this method. Which would be a clean-ish amp and an OD pedal giving me most of my gain. The high gain amps sound and feel amazing, and exactly what I'm looking for, but I can't have my reverb before my amp if the amp is a high gain amp. So I need to stick with my clean amp with reverb before it, and get my high gain sound with an OD pedal out in front.

TLDR: What are your best mid to high gain and screamin' lead sounds with an OD pedal into clean-ish amp in the Fractal?

Put the reverb after the high gain amp in a parallel row and followed by a drive block (or the 2nd amp block if it's unused) to obtain the distortion you want on the reverb only.

 

[State of Epicicity]

fm9 turbo mk2, fc-6 mk1

I'm not sure how to combine them but that would be nice to do

No problem! The easiest way is to to use an online pdf merge site; there are plenty of free ones out there, and if you're merging pdfs you don't mind others seeing, those would be fine. I like to use jPDF Tweak:

jPdf Tweak - Swiss Army Knife for PDF files

because this is freeware, you can download it to a PC, and if you're merging stuff like tax documents or something you shouldn't upload to a web app, it's great. Plus, it does have several other pdf functions. For this I combined the manuals in this order: FM9 Manual, Blocks Guide, FC6 Manual, and Footswitch Functions Guide. I kept the bookmarks from the original pdfs, but added title ones to indicate where each manual starts. Enjoy!

 

[- ★ - BROCKSTAR - ★ -]

No problem! The easiest way is to to use an online pdf merge site; there are plenty of free ones out there, and if you're merging pdfs you don't mind others seeing, those would be fine. I like to use jPDF Tweak:

jPdf Tweak - Swiss Army Knife for PDF files

because this is freeware, you can download it to a PC, and if you're merging stuff like tax documents or something you shouldn't upload to a web app, it's great. Plus, it does have several other pdf functions. For this I combined the manuals in this order: FM9 Manual, Blocks Guide, FC6 Manual, and Footswitch Functions Guide. I kept the bookmarks from the original pdfs, but added title ones to indicate where each manual starts. Enjoy!

Thank you so much! I'm in bed on the kindle right now. So I'll grab this tomorrow when I get on the computer

 

[- ★ - BROCKSTAR - ★ -]

No problem! The easiest way is to to use an online pdf merge site; there are plenty of free ones out there, and if you're merging pdfs you don't mind others seeing, those would be fine. I like to use jPDF Tweak:

jPdf Tweak - Swiss Army Knife for PDF files

because this is freeware, you can download it to a PC, and if you're merging stuff like tax documents or something you shouldn't upload to a web app, it's great. Plus, it does have several other pdf functions. For this I combined the manuals in this order: FM9 Manual, Blocks Guide, FC6 Manual, and Footswitch Functions Guide. I kept the bookmarks from the original pdfs, but added title ones to indicate where each manual starts. Enjoy!

I clicked it and it said "You’ll get an email letting you know if your request was approved".

 

[iaresee]

The device on the receiving end of the SP/DIF needs an external world clock source. If you have the FM9 set to receive the SP/DIF signal from the VP4 it will also want a clock source from the VP4. Similarly, the VP4 will want to see a clock source from the FM9 since it is receiving a digital signal on the SP/DIF input. That is where the issue lies. Neither device can provide the clock source while set to receive an external SP/DIF signal.

This is incorrect. The FM9 provides a clock on the SPDIF out when you set it to INTERNAL and it works just fine with the VP4 in a full digital I/O connection scenario.

Spdif with fm9 and vp4

I am curious about the spdif thing. If i go spdif from fm9 to spdif on vp4, then take the outs from vp4 into the IN2 on fm9... That should work once i set the ins and outs right in each machines globals? Also any recommendation for good spdif cables or does it not matter? I have never used them...

forum.fractalaudio.com