Some NAM profiles for y'all

185 models! 🤯
216 actually but it's split between 2 architectures (accuracy levels) which are further split into:

AMP = full amp + reactive load
POW = just the poweramp + reactive load
PRE = just the preamp

There are 2 profiles in there that can be used in series, after / with the AMP or POW profiles.

Either one of those [FRC] (frequency response correction) can be used since it's trained from the WET reamp of the poweramp with a reactive load against a WET reamp of the same poweramp (exact same settings) but with my Mesa 4x12 Oversized Straight loading down the poweramp.
 
Either one of those [FRC] (frequency response correction) can be used since it's trained from the WET reamp of the poweramp with a reactive load against a WET reamp of the same poweramp (exact same settings) but with my Mesa 4x12 Oversized Straight loading down the poweramp.
I'm curious how far one could take this. If, for instance, it would be possible to have an amp captured with a resistive load and use another NAM to emulate the cab - impedance and all.

I apologise for, yet again, trying to communicate (and think) before coffee.
 
I'm curious how far one could take this. If, for instance, it would be possible to have an amp captured with a resistive load and use another NAM to emulate the cab - impedance and all.

I apologise for, yet again, trying to communicate (and think) before coffee.
I'm pretty sure it's doable
 
Salvation Audio "Unnamed" (Fortin Meshuggah) preamp:

 
Back
Top