SHOW OFF YOUR PEDALBOARD!

Had the board fired up tonight.

IMG_5596.jpeg


Top is the analog stuff I run into the front of the amps in mono. Side board, the digital stereo stuff run into fx loops.

The not yet boarded table-top-80’s-direct-to-interface setup:

IMG_5591.jpeg


Thinking about adding a GigRig Quartermaster and then finding a new hobby.
 
Last edited:
Had the board fired up tonight.

View attachment 41391

Top is the analog stuff I run into the front of the amps in mono. Side board, the digital stereo stuff run into fx loops.

The not yet boarded table-top-80’s-direct-to-interface setup:

View attachment 41392

Thinking about adding a GigRig Quartermaster and then finding a new hobby.

Wow. Isn't the Maxon 808, the OG tubescreamer? I think it has true bypass though.

Since you have both, an SD1 and the Maxon, how do you use them? They sound similar but if it's like a reissue 808 which I had tried, SD1 will have more gain and output. Maybe I don't remember it right.
 
DM 101 is tasty, from the demos I have seen.

It's not a simple analog delay, unlike something like a Carbon copy or a DM-2W.

It has a lot of BBD chips controlled by a digital "CPU" brain. It must sound wonderful :)
 
The not yet boarded table-top-80’s-direct-to-interface setup:

IMG_5591.jpeg
You, sir need a few of these cables 😀


I had the same cable madness when setting up my Strymon for stereo in.
 
You, sir need a few of these cables 😀


I had the same cable madness when setting up my Strymon for stereo in.
A very timely post. I just picked up a Red Panda Raster and need one of those to get the stereo output. Thanks for the link.
 
Wow. Isn't the Maxon 808, the OG tubescreamer? I think it has true bypass though.

Since you have both, an SD1 and the Maxon, how do you use them? They sound similar but if it's like a reissue 808 which I had tried, SD1 will have more gain and output. Maybe I don't remember it right.

They do slightly different things. The SD1 actually rolls off more low end then a TS, which can be good with some amps or too much on others. Some amps need the lower mid focus of the TS, but on others it gets too mid-mushy. The SD1 pushes a different mid band. So I keep them both on the board so it will work with whatever amp I’m using. On 95% of amps one or the other will work. I keep an OCD and Klon Klone handy for the others.
 
You, sir need a few of these cables 😀


I had the same cable madness when setting up my Strymon for stereo in.

Dude you rock. That friggin TRS “situation” on the Rockman had me triggered, but I hadn’t stopped to find a better adapter/cable. :ROFLMAO:
 
I’ve only needed to make a few changes to this board since putting it together in 2019. It does what I need it to do, and I’m happy with what’s there.

Nonetheless, I’m clearly In need of psychoanalysis to resolve certain...shall we say... obsessive-compulsive issues.

UYO4v2X.jpg
 
Last edited:
I’ve only needed to make a few changes to this board since putting it together in 2019. It does what I need it to do, and I’m happy with what’s there.

Nonetheless, I’m clearly In need of psychoanalysis to resolve certain...shall we say... obsessive-compulsive issues.

UYO4v2X.jpg

Nice board.

I am assuming the one in bottom right corner is a modified klon, from the knobs.
 
I’ve only needed to make a few changes to this board since putting it together in 2019. It does what I need it to do, and I’m happy with what’s there.

Nonetheless, I’m clearly In need of psychoanalysis to resolve certain...shall we say... obsessive-compulsive issues.

UYO4v2X.jpg
I’ve noticed a few people use two Eventide’s in there setups.
How do you use yours ?
 
I’ve noticed a few people use two Eventide’s in there setups.
How do you use yours ?
Quite a wad of cash for a one-effect-at-a-time pedal. I know the sounds are professional and absolutely pristine, but it seems overpriced, also considering that there's "premium" algos that you'll only get when you upgrade or buy the MAX version.

On another note, Eventide was the company that prohibited @Tom Von Kramm naming one of his creations (I'm 100% sure it was a fuzz) "Rose" because of their upcoming "Rose" delay.

Goons, imho.
 
Back
Top