Count_Drugula
Groupie
- Messages
- 32
I guarantee that intro is the Fun Machine, sounds like my old one. Too bad I don't have it anymore, took up too much room, but it did live up to its name under the right circumstances
SHOW OFF YOUR PEDALBOARD!
- Thread starter Jordon18
- Start date
I guarantee that intro is the Fun Machine, sounds like my old one. Too bad I don't have it anymore, took up too much room, but it did live up to its name under the right circumstances
- Messages
- 6,193
Had the board fired up tonight.
Top is the analog stuff I run into the front of the amps in mono. Side board, the digital stereo stuff run into fx loops.
The not yet boarded table-top-80’s-direct-to-interface setup:
Thinking about adding a GigRig Quartermaster and then finding a new hobby.
Top is the analog stuff I run into the front of the amps in mono. Side board, the digital stereo stuff run into fx loops.
The not yet boarded table-top-80’s-direct-to-interface setup:
Thinking about adding a GigRig Quartermaster and then finding a new hobby.
Last edited:
newpedals
Roadie
- Messages
- 614
Wow. Isn't the Maxon 808, the OG tubescreamer? I think it has true bypass though.
Since you have both, an SD1 and the Maxon, how do you use them? They sound similar but if it's like a reissue 808 which I had tried, SD1 will have more gain and output. Maybe I don't remember it right.
dbagchee
Roadie
- Messages
- 716
You, sir need a few of these cablesThe not yet boarded table-top-80’s-direct-to-interface setup:
RockBoard Flat Patch Y Splitter Cable 20 cm / 7 7/8"
The RockBoard Flat Y-Splitter cable is extra flat and space-saving. Designed to optimize pedalboard real estate, it features a slim rectangular body and very thin angled plugs. It keeps the setup tidy and neat looking and guarantees a short, clean signal path and pristine signal quality.Using...
www.chicagomusicexchange.com
I had the same cable madness when setting up my Strymon for stereo in.
- Messages
- 110
A very timely post. I just picked up a Red Panda Raster and need one of those to get the stereo output. Thanks for the link.You, sir need a few of these cables
RockBoard Flat Patch Y Splitter Cable 20 cm / 7 7/8"
The RockBoard Flat Y-Splitter cable is extra flat and space-saving. Designed to optimize pedalboard real estate, it features a slim rectangular body and very thin angled plugs. It keeps the setup tidy and neat looking and guarantees a short, clean signal path and pristine signal quality.Using...
I had the same cable madness when setting up my Strymon for stereo in.
Baba
Shredder
- Messages
- 1,468
- Messages
- 6,193
They do slightly different things. The SD1 actually rolls off more low end then a TS, which can be good with some amps or too much on others. Some amps need the lower mid focus of the TS, but on others it gets too mid-mushy. The SD1 pushes a different mid band. So I keep them both on the board so it will work with whatever amp I’m using. On 95% of amps one or the other will work. I keep an OCD and Klon Klone handy for the others.
- Messages
- 6,193
You, sir need a few of these cables
RockBoard Flat Patch Y Splitter Cable 20 cm / 7 7/8"
The RockBoard Flat Y-Splitter cable is extra flat and space-saving. Designed to optimize pedalboard real estate, it features a slim rectangular body and very thin angled plugs. It keeps the setup tidy and neat looking and guarantees a short, clean signal path and pristine signal quality.Using...
I had the same cable madness when setting up my Strymon for stereo in.
Dude you rock. That friggin TRS “situation” on the Rockman had me triggered, but I hadn’t stopped to find a better adapter/cable.
- Messages
- 117
I’ve only needed to make a few changes to this board since putting it together in 2019. It does what I need it to do, and I’m happy with what’s there.
Nonetheless, I’m clearly In need of psychoanalysis to resolve certain...shall we say... obsessive-compulsive issues.
Nonetheless, I’m clearly In need of psychoanalysis to resolve certain...shall we say... obsessive-compulsive issues.
Last edited:
newpedals
Roadie
- Messages
- 614
I’ve only needed to make a few changes to this board since putting it together in 2019. It does what I need it to do, and I’m happy with what’s there.
Nonetheless, I’m clearly In need of psychoanalysis to resolve certain...shall we say... obsessive-compulsive issues.
Nice board.
I am assuming the one in bottom right corner is a modified klon, from the knobs.
- Messages
- 117
Thanks!
You are correct! That's the Pettyjohn Rare I mentioned in my post in another thread.
newpedals
Roadie
- Messages
- 614
Dave Lewis
Roadie
- Messages
- 842
I’ve noticed a few people use two Eventide’s in there setups.I’ve only needed to make a few changes to this board since putting it together in 2019. It does what I need it to do, and I’m happy with what’s there.
Nonetheless, I’m clearly In need of psychoanalysis to resolve certain...shall we say... obsessive-compulsive issues.
How do you use yours ?
dronerstone
Shredder
- Messages
- 1,525
Quite a wad of cash for a one-effect-at-a-time pedal. I know the sounds are professional and absolutely pristine, but it seems overpriced, also considering that there's "premium" algos that you'll only get when you upgrade or buy the MAX version.
On another note, Eventide was the company that prohibited @Tom Von Kramm naming one of his creations (I'm 100% sure it was a fuzz) "Rose" because of their upcoming "Rose" delay.
Goons, imho.
- Messages
- 8,086
Awesome setup, looking sharp!I’ve only needed to make a few changes to this board since putting it together in 2019. It does what I need it to do, and I’m happy with what’s there.
Nonetheless, I’m clearly In need of psychoanalysis to resolve certain...shall we say... obsessive-compulsive issues.
Good to see you around again.
- Messages
- 8,086
Spaced Out Ace
Shredder
- Messages
- 1,532
Fuck Eventide. $900 for two algorithms at a time. "Yeah, but an algorithm can have more than one effect at a time!" Swell, more than one effect at a time I may or may not want.
Spaced Out Ace
Shredder
- Messages
- 1,532
From this to this:
