SHOW OFF YOUR PEDALBOARD!

Had the board fired up tonight.

IMG_5596.jpeg


Top is the analog stuff I run into the front of the amps in mono. Side board, the digital stereo stuff run into fx loops.

The not yet boarded table-top-80’s-direct-to-interface setup:

IMG_5591.jpeg


Thinking about adding a GigRig Quartermaster and then finding a new hobby.
 
Last edited:
Had the board fired up tonight.

View attachment 41391

Top is the analog stuff I run into the front of the amps in mono. Side board, the digital stereo stuff run into fx loops.

The not yet boarded table-top-80’s-direct-to-interface setup:

View attachment 41392

Thinking about adding a GigRig Quartermaster and then finding a new hobby.

Wow. Isn't the Maxon 808, the OG tubescreamer? I think it has true bypass though.

Since you have both, an SD1 and the Maxon, how do you use them? They sound similar but if it's like a reissue 808 which I had tried, SD1 will have more gain and output. Maybe I don't remember it right.
 
DM 101 is tasty, from the demos I have seen.

It's not a simple analog delay, unlike something like a Carbon copy or a DM-2W.

It has a lot of BBD chips controlled by a digital "CPU" brain. It must sound wonderful :)
 
The not yet boarded table-top-80’s-direct-to-interface setup:

IMG_5591.jpeg
You, sir need a few of these cables 😀


I had the same cable madness when setting up my Strymon for stereo in.
 
You, sir need a few of these cables 😀


I had the same cable madness when setting up my Strymon for stereo in.
A very timely post. I just picked up a Red Panda Raster and need one of those to get the stereo output. Thanks for the link.
 
Wow. Isn't the Maxon 808, the OG tubescreamer? I think it has true bypass though.

Since you have both, an SD1 and the Maxon, how do you use them? They sound similar but if it's like a reissue 808 which I had tried, SD1 will have more gain and output. Maybe I don't remember it right.

They do slightly different things. The SD1 actually rolls off more low end then a TS, which can be good with some amps or too much on others. Some amps need the lower mid focus of the TS, but on others it gets too mid-mushy. The SD1 pushes a different mid band. So I keep them both on the board so it will work with whatever amp I’m using. On 95% of amps one or the other will work. I keep an OCD and Klon Klone handy for the others.
 
You, sir need a few of these cables 😀


I had the same cable madness when setting up my Strymon for stereo in.

Dude you rock. That friggin TRS “situation” on the Rockman had me triggered, but I hadn’t stopped to find a better adapter/cable. :ROFLMAO:
 
Back
Top