ian_dissonance
Shredder
- Messages
- 1,708
For me the stability and resource usage was a big draw at first. Not like PT where I just thought about PT and it already is preparing the crash right away when I open it next time to export files into Reaper.
Fractal Talk
- Thread starter laxu
- Start date
- Messages
- 9,649
You're a slag you are.I've never tried D.P. - any good?
or do you prefer Just The Tip™
metropolis_4
Rock Star
- Messages
- 4,392
What’s wrong with Ableton?
I loved using it back in the day. But I didn’t use it for recording, I only used it as a tool for live performance. It was amazing for sequencing and controlling everything in a show
I loved using it back in the day. But I didn’t use it for recording, I only used it as a tool for live performance. It was amazing for sequencing and controlling everything in a show
- Messages
- 1,559
Axe-Fx III Firmware 30.00 Public Beta
https://www.fractalaudio.com/downloads/firmware-presets/axe-fx-3/30p0/axefxiii_dsp_rel_30p00_beta1.zip Axe-Fx III Firmware Release Notes 30.00 NOTE: This firmware requires installation of Dyna-Cabs version 1.09 (included in the .zip file). Refer to the DynaCab Installation Guide for details...
Axe-Fx III Firmware Release Notes
30.00
NOTE: This firmware requires installation of Dyna-Cabs version 1.09 (included in the .zip file). Refer to the DynaCab Installation Guide for details. Be sure to install the firmware before installing the Dyna-Cabs.
Added Tracking Mode parameter to Synth and Ring Mod blocks. When set to “BASS” the pitch tracking range is shifted down one octave with the lowest detectable note being approximately F#0.
Increased upper range of pitch detectors to approximately F#6. This prevents loss of tracking if playing at the 24th fret on the high E string and bending up a whole step.
Added “PI Fuzz – Bass” model based on a Deluxe Bass Big Muff Pi.
Added “NoAmp Bass DI” based on a SansAmp BassDriver DI.
Added “NoAmp Bass Pre” based on a SansAmp BassDriver DI with the speaker emulation bypassed. This can be used into a Cabinet block or as a boost into an Amp block.
Added “Royal Bass DI” based on a Noble Bass Preamp DI. The model has been modified with more gain so that it can be overdriven. With the Drive knob at 5.00 the gain is the same as the actual preamp. Also, instead of a Low Cut switch, the model uses an adjustable Low Cut control.
Added “7 Band Pedal” Graphic EQ type based on a Boss GE-7.
Added “7 Band Bass Pedal” Graphic EQ type based on a Boss GE-7B.
Added “1x8 Princetone” Dyna-Cabs captured from a 5F2 Tweed Princeton w/ a very nice sounding 8” Jupiter speaker. Added corresponding Speaker Impedance Curve.
Added “1x12 Black Majik” Dyna-Cabs captured from a Supro Black Majik with a Jensen P12Q speaker. Added corresponding Speaker Impedance Curve.
Added “8x10 SV Bass” Dyna-Cabs captured from an Ampeg SVT. Added corresponding Speaker Impedance Curve. Thanks to Mike "Dr. Bonkers" Santasiero for the files from his DynaCab Pack, "Dr. Bonkers 8x10 SBB Bass". If you like this selection of mics, you can purchase the entire pack for Cab Lab at https://shop.fractalaudio.com
Improved accuracy of Sustain control vs. position in PI Fuzz models.
Fixed wrong resistor value in Blackglass 7K model. Remastered model as a result.
Fixed incorrect gain in Colortone Booster and Colortone OD models.
Fixed wrong capacitor value in all Blackface Vibrato models (Deluxe Verb, Double Verb, Super Verb, Vibroverb), Div/13 FT37 models and the Double Verb Silverface model. Change probably isn’t very noticeable.
Fixed wrong resistor value in Deluxe Verb Normal model. Remastered model as a result.
Fixed Modern Gate type can get stuck closed if input above threshold during boot.
Various other fixes and improvements.
deathbyguitar
Roadie
- Messages
- 329
Hell froze over today for a lot of Fractal bassists.Axe-Fx III Firmware 30.00 Public Beta
https://www.fractalaudio.com/downloads/firmware-presets/axe-fx-3/30p0/axefxiii_dsp_rel_30p00_beta1.zip Axe-Fx III Firmware Release Notes 30.00 NOTE: This firmware requires installation of Dyna-Cabs version 1.09 (included in the .zip file). Refer to the DynaCab Installation Guide for details...forum.fractalaudio.com
Axe-Fx III Firmware Release Notes
30.00
NOTE: This firmware requires installation of Dyna-Cabs version 1.09 (included in the .zip file). Refer to the DynaCab Installation Guide for details. Be sure to install the firmware before installing the Dyna-Cabs.
Added Tracking Mode parameter to Synth and Ring Mod blocks. When set to “BASS” the pitch tracking range is shifted down one octave with the lowest detectable note being approximately F#0.
Increased upper range of pitch detectors to approximately F#6. This prevents loss of tracking if playing at the 24th fret on the high E string and bending up a whole step.
Added “PI Fuzz – Bass” model based on a Deluxe Bass Big Muff Pi.
Added “NoAmp Bass DI” based on a SansAmp BassDriver DI.
Added “NoAmp Bass Pre” based on a SansAmp BassDriver DI with the speaker emulation bypassed. This can be used into a Cabinet block or as a boost into an Amp block.
Added “Royal Bass DI” based on a Noble Bass Preamp DI. The model has been modified with more gain so that it can be overdriven. With the Drive knob at 5.00 the gain is the same as the actual preamp. Also, instead of a Low Cut switch, the model uses an adjustable Low Cut control.
Added “7 Band Pedal” Graphic EQ type based on a Boss GE-7.
Added “7 Band Bass Pedal” Graphic EQ type based on a Boss GE-7B.
Added “1x8 Princetone” Dyna-Cabs captured from a 5F2 Tweed Princeton w/ a very nice sounding 8” Jupiter speaker. Added corresponding Speaker Impedance Curve.
Added “1x12 Black Majik” Dyna-Cabs captured from a Supro Black Majik with a Jensen P12Q speaker. Added corresponding Speaker Impedance Curve.
Added “8x10 SV Bass” Dyna-Cabs captured from an Ampeg SVT. Added corresponding Speaker Impedance Curve. Thanks to Mike "Dr. Bonkers" Santasiero for the files from his DynaCab Pack, "Dr. Bonkers 8x10 SBB Bass". If you like this selection of mics, you can purchase the entire pack for Cab Lab at https://shop.fractalaudio.com
Improved accuracy of Sustain control vs. position in PI Fuzz models.
Fixed wrong resistor value in Blackglass 7K model. Remastered model as a result.
Fixed incorrect gain in Colortone Booster and Colortone OD models.
Fixed wrong capacitor value in all Blackface Vibrato models (Deluxe Verb, Double Verb, Super Verb, Vibroverb), Div/13 FT37 models and the Double Verb Silverface model. Change probably isn’t very noticeable.
Fixed wrong resistor value in Deluxe Verb Normal model. Remastered model as a result.
Fixed Modern Gate type can get stuck closed if input above threshold during boot.
Various other fixes and improvements.
JiveTurkey
Goatlord
- Messages
- 21,771
laxu
Rock Star
- Messages
- 8,112
Let's not celebrate yet. Still no new bass amps!
Hold firm bassists! Eventually Cliff will be "FINE! I'LL ADD SOME HARTKES, TRACE ELLIOTS AND AGUILARS! ARE YOU HAPPY NOW?! HUH?!"
Vic Winters
Roadie
- Messages
- 277
G-K.
- Messages
- 1,559
There was an issue with a speaker drive bug with the new firmware i posted above but cliff fixed it
forum.fractalaudio.com
Axe-Fx III Firmware 30.00 Public Beta #2
This fixes the issue with the Speaker Drive in Beta #1: https://www.fractalaudio.com/downloads/firmware-presets/axe-fx-3/30p0/axefxiii_dsp_rel_30p00_beta2.zip Axe-Edit Installers: OSX https://www.fractalaudio.com/downloads/Axe-Edit-III/Axe-Edit-III-OSX-v1p14p20.dmg Win64...
gearJunkie
Rock Star
- Messages
- 2,638
an update - public beta 2
forum.fractalaudio.com
Axe-Fx III Firmware 30.00 Public Beta #2
This fixes the issue with the Speaker Drive in Beta #1: https://www.fractalaudio.com/downloads/firmware-presets/axe-fx-3/30p0/axefxiii_dsp_rel_30p00_beta2.zip Axe-Edit Installers: OSX https://www.fractalaudio.com/downloads/Axe-Edit-III/Axe-Edit-III-OSX-v1p14p20.dmg Win64...
- Messages
- 1,559
an update - public beta 2
Axe-Fx III Firmware 30.00 Public Beta #2
This fixes the issue with the Speaker Drive in Beta #1: https://www.fractalaudio.com/downloads/firmware-presets/axe-fx-3/30p0/axefxiii_dsp_rel_30p00_beta2.zip Axe-Edit Installers: OSX https://www.fractalaudio.com/downloads/Axe-Edit-III/Axe-Edit-III-OSX-v1p14p20.dmg Win64...
beat you already
gearJunkie
Rock Star
- Messages
- 2,638
Damn, you're fast.There was an issue with a speaker drive bug with the new firmware i posted above but cliff fixed it
Axe-Fx III Firmware 30.00 Public Beta #2
This fixes the issue with the Speaker Drive in Beta #1: https://www.fractalaudio.com/downloads/firmware-presets/axe-fx-3/30p0/axefxiii_dsp_rel_30p00_beta2.zip Axe-Edit Installers: OSX https://www.fractalaudio.com/downloads/Axe-Edit-III/Axe-Edit-III-OSX-v1p14p20.dmg Win64...
Piing
Shredder
- Messages
- 1,637
With Bass?
Time to rescue my Boss SY-1000 back from the drawer
NightWalker
Roadie
- Messages
- 206
lol Fractal always fixing something in the amps,but the fractal fanbois are like ohhh wow that amp sound awesome
Elric
Roadie
- Messages
- 810
Things that aren’t perfect are absolutely capable of still sounding awesome. Shrug.lol Fractal always fixing something in the amps,but the fractal fanbois are like ohhh wow that amp sound awesome
- Messages
- 1,559
lol Fractal always fixing something in the amps,but the fractal fanbois are like ohhh wow that amp sound awesome
Even a broken real life amp or pedal can sound awesome to the right person depending on what they're going for
Hell... a lot of records in the past and I'm sure later as well had blown speakers and other issues that still made it to record!
