Fractal Audio Systems AM4 - Amp Modeler

[- ★ - BROCKSTAR - ★ -]

Connected via SPDIF, right?

Not this time. I did before, but right now the vp4 is in the inserts of the AM4.

However I may change back once I move these boxes on top of my axe-fx 3 and put them into axe-fx 3 for more POWER!

 

[JiveTurkey]

Can you split spdif in and out on the VP4 and do a pre and post fx that way?

 

[- ★ - BROCKSTAR - ★ -]

It looks like it, can you confirm the AM4 is the same size as VP4?

Yes it is.

 

[sashimi]

Well, I did not think I would be buying a fractal device this week but I don’t know if I can resist. This is the fractal I’ve been waiting for.

 

[iaresee]

Can you split spdif in and out on the VP4 and do a pre and post fx that way?

No.

At least I can't think through how that would work just sitting here staring at the computer screen.

 

[- ★ - BROCKSTAR - ★ -]

No.

At least I can't think through how that would work just sitting here staring at the computer screen.

Same. I'm thinking no on this too.

 

[sashimi]

Good thing I don’t care about midi or those midi headphone jacks would be a big deal to me.

 

[Whizzinby]

This...is going to require me to remind myself over and over and over and over and over again that selling the Axe III/FC12 and replacing with this will NOT save me money in the long run....

I don’t think I’ll ever sell the III, even when the IV gets released. It’s always going to be an elite tier Fx processor. Seeing how Tascam 4 track preamps are having a moment, or insert insanely priced 80’s rack fx units, you know some dude name MK.Geezer will be revered for going “retro” and using a III in like 25 years, and they’ll be going for like $17,346 on Reverb.

 

[Lysander]

Wait, so the AM4 packs all the amps, Dynacabs and effects from the FM3/FM9/Axe-FX III?!

Damn that's a great solution, specially in a package that size/cost. I reckon 90% of y'all will never need more than four blocks.

 

[- ★ - BROCKSTAR - ★ -]

Wait, so the AM4 packs all the amps, Dynacabs and effectsi from the FM3/FM9/Axe-FX III?!

Damn that's a great solution, specially in a package that size/cost. I reckon 90% will never need more than four blocks.

Not ALL of the effects but a lot!

 

[sashimi]

This is pretty much the perfect hx stomp competitor. And it looks like the amp block has cab and room reverb built in, which covers 3 blocks on my stomp, so it’s really not too limiting either.

 

[FuzzyAce]

 

[2dor]

Pure awesome!!

 

[banned]

Not ALL of the effects but a lot!

What's missing? Anything important?

 

[- ★ - BROCKSTAR - ★ -]

What's missing? Anything important?

AM4

VP4

 

[GTR37]

Wait, so the AM4 packs all the amps, Dynacabs and effects from the FM3/FM9/Axe-FX III?!

Damn that's a great solution, specially in a package that size/cost. I reckon 90% of y'all will never need more than four blocks.

Basically no pitch block
No mega tap , no multi delays
No vocoder or formant

Other than that and 4 channels 4 block limit looks like your golden

I am guessing no smoothing in the cab block

 

[yek]

I am guessing no smoothing in the cab block

IMHO smoothing has lost its added value with the recent introduction of Auto Delay / Auto Align.

 

[FuzzyAce]

 

[- ★ - BROCKSTAR - ★ -]

If anyone wants to know the size of AM4 next to VP4 it's roughly 20 inches which is just about the same size of FM9.

 

[timbuck3]

The list is trimmed down a bit but the essential stuff is in there. We removed things like "Viscous Homologater Diode Reverse Leakage Gamma Flux" and such.

How is effects loop implemented? Anywhere in chain? Is there looper?