Show Your Pedal Builds

SillyOctpuss said:
I didn't know amp tweaker had made a fuzz pedal. I was just reading the build doc from aion, seems the fuzz pot controls the gain and the bias in Q2. According to the doc it's a light fuzz at noon and once you get to 2/3 o'clock it becomes a traditional fuzz tone. I can see what you mean about a small range of fuzz tones. That would put me off tbh.

If you're looking for a more traditional fuzz I'd go for a silicon sun face clone or a JHF1 clone. The skreddy fuzzes are always worth a look too, great pedals.
Click to expand...
Yeah, like I said, this bad decision is on me. I bought into the Amptweaker trifecta but a cursory look at the build docs might have steered me a different direction. I do have a Musket Fuzz board on the way, so that may scratch the itch a bit better. I also still have a Hyper Fuzz board. I’m just waiting for the headers to arrive.

I’ll have to look into your suggestions, as well as @HomespunEffects ’s.
 
eggpl@nt said:
Yeah, like I said, this bad decision is on me. I bought into the Amptweaker trifecta but a cursory look at the build docs might have steered me a different direction. I do have a Musket Fuzz board on the way, so that may scratch the itch a bit better. I also still have a Hyper Fuzz board. I’m just waiting for the headers to arrive.

I’ll have to look into your suggestions, as well as @HomespunEffects ’s.
Click to expand...

I don't know the musket fuzz. Is that the Blackout Effectors pedal? You'll have to let us know what you think when you've built it. I've never heard of it before tbh.
 
HomespunEffects said:
Yeah, it’s the only fuzz type that I actually like.
Click to expand...

I just keep forgetting about it. I've got so many I need to finish once this bloody bronchitis sods off.

Might chuck one together on vero just to check it out before committing to pcb, there seems to be a lot of different traces and I'm not sure which one to use.
 
Here’s my Harmonic Percolator:
IMG_4394.jpeg
 
SillyOctpuss said:
I don't know the musket fuzz. Is that the Blackout Effectors pedal? You'll have to let us know what you think when you've built it. I've never heard of it before tbh.
Click to expand...
Yep - the Blackout Effectors Musket Fuzz. I tried a vero board version of it a loooong time ago - never managed to get it working. I still don't know if it's quite what I want from a fuzz pedal, but when I saw Aion had a board, I had to try it, if only to redeem my vero failure lol
 
I really botched the enclosure on this last one, but the Ember (Amptweaker Tight Metal + Tight Rock) is done.

The important lesson learned here is: don't spray paint an enclosure on a windy, 30F day. The enclosure will feel dry, but as it warms up inside, it will show its true, sticky self. Electrically, everything works just fine. Aesthetically, it ain't pretty.

I built this primarily for the Tight Metal circuit, but the Tight Rock sounds great too - the STYLE switch is primarily what makes this a Tight Rock or Tight Metal clone. What's interesting is, both the CUT and STYLE switch have to be in the same position to match the Tight Rock or Tight Metal circuit. Both UP is Metal, both DOWN is Rock - so some in-between settings can be achieved with this hybridized pedal.

Another interesting thing about this build - in the original, the Gate setting was controlled by the Gain knob, courtesy of a dual gang pot. Aion separated the Gain and Gate into separate controls, which I appreciate. The original control scheme can be simulated by putting the Gain and Gate knobs in the same position, but again - this implementation offers options not available on the original. I was running the Gate lower than the Gain, so I'd probably be irritated with the two being tied together.

I won't wax on too long, but this is a really good distortion pedal. I tested is into my Axe Fx using the Tube Pre as a power amp sim, as @2112 demonstrated in this YouTube video. It can really stand on it's own, with the Boost and Tight controls allowing you to achieve pretty much anything you'd want out of a metal tone, but I also really liked running the Blaze in front of it. I'm just too addicted to boosting high gain tones with an external pedal.

And with that, I round out my vacation builds. I completed 7 of the 9 Aion kits I purchased back in September/October. I still have a few Aion kits and a handful of PedalPCB kits, so I'll remain busy with this as time allows. Here's the lineup.

1736000884421.jpeg
 
Humbug said:
View attachment 35880View attachment 35881Oh, look, this one's actually a pedal and not just a tube and filament wiring :LOL:
There are some NAM-captures of it here: https://tonehunt.org/Humbug/1f964ddb-240e-4e57-bec4-0f1cc6cecaaa

Edit: I didn't expect the shitty soldering to be _that_ obvious, but it is what it is and what it is is a prototype that's supposed to work, not be pretty :)
Click to expand...

I'm not gonna lie. SMD soldering scares the crap out of me.

I understand the process but have never tried it and don't think I really want to tbh.
 
Humbug said:
It's not that bad, but you need good eyesight (or a magnification device) and a good amount of flux and patience. This was a rush job and it shows :LOL:
Click to expand...

My eyesight sucks but I've got a great magnifier for my through hole soldering. I've really only used some smd jfets and fv1 chips, but I spent a little more cash to get them pre soldered to adaptor boards before using them as through hole components.
 
Today, I awoke a Fuzz Boy, but I will sleep tonight a Fuzz Man.

The Aion Hypercube is based on the Boss FZ-2 Hyperfuzz, and it is exactly what I wanted from a fuzz pedal. It's abrasive, it's saturated, it's big, it's scary, and it's pink.

Mode 0 is a surprisingly good boost. It removes some of, but not all of, the fuzziness so it can boost an overdriven amp without going completely bonkers.

Mode 1 is my favorite. Into clean amp, it's a huge, fuzzy, almost broken-sounding mess. Into an overdriven amp, it does that Knocked Loose grindy sound. The tone knobs have a really useful range in this setting. It is a quite a bit duller than Mode 2, but that can be remedied by cranking the Treble.

Mode 2 is almost too abrasive. I wish it was a little less ice picky, even with the Treble set low. I imagine the more-scooped Mode 2 might double track well with Mode 1.

This was a fun build with some added twists over the others I've done. I didn't include gut shots because the sandwiched PCBs don't really leave much to see, other than the underside of the upper board. I can't be sure that I didn't make any mistakes with this build, but everything works and aside from my quibble with Mode 2, it sounds excellent.

IMG_3661.jpeg
 
HomespunEffects said:
Have you tried building a Harmonic Percolator yet?
Click to expand...
PedalPCB is doing a 20% off sale, so I bought a Harmonic Percolator board.

Question - I noticed the Harmonic Percolator clones from both PedalPCB and Aion only have two knobs - Harmonics and Balance. What modifications does your version have? Do Intensity and Volume map to Harmonics and Balance? What's the story behind Asymmetry and Century?

Aion has a clipping switch to select different clipping options - does your clone sweep between them continuously rather than switch between them discretely?
 
eggpl@nt said:
What modifications does your version have? Do Intensity and Volume map to Harmonics and Balance? What's the story behind Asymmetry and Century?
Click to expand...
Intensity is Harmonics.
Volume is Balance.
Asymmetry adds resistance to one side of the clipping diodes.
Century sweeps between 1N60A diodes and IRF520 used for clipping.
HARMPERCCONT.gif


Century was supposed to be called Temperament but when I made the design in Photoshop I originally just called them anything and then when I printed it out, of course I printed the wrong version. I just went with it.
 
You must log in or register to reply here.
Back
Top