SHOW OFF YOUR PEDALBOARD!

[Orvillain]

Little bit of a rejig. I could absolutely fit more onto this, but it is actually designed for ergonomics live, just as much as tonal variety.

Volume+Wah. Self explanatory. Polytune connects to the volume pedal for an always on tuner.

After the wah is the DD-500. I really fell in love with this pedal all over again since getting my 4th or 5th one since they launched. I use bank 97 exclusively with Summerisle. Preset A is a standard digital delay. Preset B is an analog delay.

Then into the Nemesis. I do use quite a few sounds on this when jamming at home. But live I just use my first preset, which is an analog delay. I like it because it doesn't go all pitchy when you tap the tempo. The midi clock of the DD-500 feeds the Nemesis so they're always clocked together.

Then into the RV-5, set to Modulate mode.

Then into the Meris MercuryX. This is such a sick reverb pedal. I have 3 presets on this that I use. A huge hall, a kind of shimmery cloud thing, and then another huge supernatural thing, without any shimmer and a bit dark.

Then into the MXR Reverb, and this I am just using for a tiny tiny bit of plate reverb. I only use that for cleans in one song.

 

[gearJunkie]

I'm still trying to figure out my Tone King preamp board. I picked up a Strich Standard 28 board for less than $100, so this is my current plan.

Top and bottom board images are flipped, so the DC7 is directly beneath the Royalist.

First row (ordered from right to left) go into the Imperial input.

The Imperial will run into the Royalist which will connect to my Badlander preamp for a total of 6 channels.

Top row effects will run in stereo. The Mood and OBNE parting will be routed in a parallel loop on the Wetter Box into the Imperial effects loop.

Graviton M2 directs MIDI for Mood, OBNE, El Capistan, Brothers AM, and both TK preamps. A CME WIDI Thru6 BT adds flexibility for all of the MIDI connections and will send CC messages to a Suhr microMIDI Control box via Bluetooth for changing Badlander channels.

I'm not decided on final output routing. I intend to incorporate the Underfacer stereo ins and outs since it can be reconfigured for stereo or mono simply by pressing a button. I'll need to experiment so the board will work mono and stereo regardless of running direct or with real amps. I hope to also work out a wet/dry configuration.

Lots of fun ahead working on this board.

 

[Whizzinby]

I'm still trying to figure out my Tone King preamp board. I picked up a Strich Standard 28 board for less than $100, so this is my current plan.

View attachment 60797
Top and bottom board images are flipped, so the DC7 is directly beneath the Royalist.

First row (ordered from right to left) go into the Imperial input.

The Imperial will run into the Royalist which will connect to my Badlander preamp for a total of 6 channels.

Top row effects will run in stereo. The Mood and OBNE parting will be routed in a parallel loop on the Wetter Box into the Imperial effects loop.

Graviton M2 directs MIDI for Mood, OBNE, El Capistan, Brothers AM, and both TK preamps. A CME WIDI Thru6 BT adds flexibility for all of the MIDI connections and will send CC messages to a Suhr microMIDI Control box via Bluetooth for changing Badlander channels.

I'm not decided on final output routing. I intend to incorporate the Underfacer stereo ins and outs since it can be reconfigured for stereo or mono simply by pressing a button. I'll need to experiment so the board will work mono and stereo regardless of running direct or with real amps. I hope to also work out a wet/dry configuration.

Lots of fun ahead working on this board.

That’s gonna be friggin killer.

The Underfacer can do a stereo sum to mono with a button switch?

 

[gearJunkie]

That’s gonna be friggin killer.

The Underfacer can do a stereo sum to mono with a button switch?

Summing​

The TX Underfacer has two types of summing: Stereo Sum and Split Sum. To access these two modes, use the internal DIP switch to select which mode is best for you.

1. Stereo Sum – This is the default mode The TX Underfacer ships with. In this mode use stereo effects as normal. When summed, the left and right inputs are merged and the exact same signal is sent to the left and right outputs.
2. Split sum – Still use stereo effects as normal. When summed, the right input is ignored and the left input is split to both left and right outputs.

 

[Richard_G]

Wow. That's going to be incredible!