JasonE
Roadie
- Messages
- 821
I actually have a Fulltone Secret Freq pedal that does the Boston / Tom Scholz mid boosted drive tone very well. That is where I would start for the driven tones.Just boost 1k, right?
Looks like the Rockman is back
- Thread starter MirrorProfiles
- Start date
- Messages
- 2,361
Baba
Shredder
- Messages
- 1,488
So much this
Baba
Shredder
- Messages
- 1,488
I just found an HX "imitation" preset for the sounds of the X100, I did NOT need to read this.
JiveTurkey
Goatlord
- Messages
- 18,936
Mom: "We have Rockman cleans at home":
Rockman cleans at home:
"Looks like we do, Mom!"
Rockman cleans at home:
"Looks like we do, Mom!"
Los-D
Shredder
- Messages
- 1,805
I was playing “Memories” from Satch on my iPad this morning (X100 DIST NAM file + Eventide Chorus/Reverb). I need this on my pedalboard.
Last edited:
Los-D
Shredder
- Messages
- 1,805
Welp, I downloaded this for my Helix, so, I won’t be needing the pedal:
Regardless of if you have a Helix or not, it’s interesting how he did it.
I use a similar capture as this one, but adjust the input gain, add a compressor block to further dial in the tone, and include Eventide effects (TriceraChorus tweaked to sound like the Rockman; Ultratap for echo/reverb).
(Not me playing, and I find that my tone is much closer to Satch than Def Leppard)
- Messages
- 6,209
Mine comes tomorrow
How do you like it? I missed the first batch, so I’m waiting patiently…
scole
Roadie
- Messages
- 117
Sorry to say I haven’t played it yet. Long story but being a mono in / TRS out, it kind of dictates where it can go on my board. I want to preserve the stereo out so that forces it on my board between the last mono only pedal (MXR EVH phase 90) and the first stereo input pedal (Eventide MicroPitch). But between those two I had the MXR EVH Chorus which is also mono in / TRS stereo out.How do you like it? I missed the first batch, so I’m waiting patiently…
I’ve decided to run the EVH chorus as mono/mono into the Rockman & then stereo afterwards. Anyways, I ordered the wrong TRS cable so I had to wait for the right one to show up which was last night. I also had to dig out some DC power splitting cables from my stash so I should be able to play through it tonight.
First world problems.
norminal
Rock Star
- Messages
- 6,815
Ridiculous. These will be plentiful going forward. It’s not a limited edition pedal and it’s, well, MXR.
- Messages
- 2,361
Speaking of Rockman (& Rockmodules) gear prices, I checked out what the originals (I have 6 items) that I own are selling for on Reverb...
(these are high "SOLD" examples).
A very wise investment indeed!
(these are high "SOLD" examples).
Rockman X-100 $600
Rockman Sustainor 100A $515
Rockman Stereo Echo $995
Rockman Stereo Chorus $550
Rockman Distortion Generator $499
Rockman Midi Octopus $270
Total: $3,429
A very wise investment indeed!
- Messages
- 17,013
Yup. Some clueless cat hoping someone comes along more clueless than he is. Like I said,
Guru, my ass.
Los-D
Shredder
- Messages
- 1,805
That’s some Klon-like bullshit.
“With the highly sought after magical mystical
- Messages
- 2,361
Fun Fact:
The Stereo Echo Rockmodule (delay unit) is generally considered a valuable piece of gear in studios at this point in time. It's probably the most expensive Rockmodule of the set. 100% analog delay. Has a tape-like quality to the sound.
Tom designed it so that there is a particular ratio (3:5) between the Left & Right delays. This ratio stays the same regardless of the milliseconds selected:
The front panel lists certain echo time points (but you can of course go anywhere between them with the slider):
L 75 - 150 - 300 ms
R 125 - 250 - 500 ms
Then there's the Pan Select switch, which gives you 3 settings:
1. <echo>
>main<
(echo wide L/R, main center)
2. <echo>
<main>
(echo wide L/R, main wide L/R)
3. echo>
<main
(echo wide R, main wide L)
Remember, this unit was introduced in 1987!
The Stereo Echo Rockmodule (delay unit) is generally considered a valuable piece of gear in studios at this point in time. It's probably the most expensive Rockmodule of the set. 100% analog delay. Has a tape-like quality to the sound.
Tom designed it so that there is a particular ratio (3:5) between the Left & Right delays. This ratio stays the same regardless of the milliseconds selected:
The front panel lists certain echo time points (but you can of course go anywhere between them with the slider):
L 75 - 150 - 300 ms
R 125 - 250 - 500 ms
Then there's the Pan Select switch, which gives you 3 settings:
1. <echo>
>main<
(echo wide L/R, main center)
2. <echo>
<main>
(echo wide L/R, main wide L/R)
3. echo>
<main
(echo wide R, main wide L)
Remember, this unit was introduced in 1987!
