Calling All Good Sounding 4x12 Cab Owners

[2dor]

..should work even with a mic-ed signal I guess given the mic's effect is mostly linear (ie. IRs).

 

[James Freeman]

@James Freeman - here we go...

Dropbox

www.dropbox.com

You can daisy-chain this NAM profile after your DI signal coming from the amp loaded with a Marshall 4x12 1960BV cab.

It should get you closer to a Mesa 4x12 OS Straight than a static IR can.

All I see is a flat line. the capture is empty...?
For now a recording of pink noise with whatever poweramp you have will do, I can apply an approximation of a reverse impedance curve EQ later.

 

[2dor]

All I see is a flat line. the capture is empty...?
For now a recording of pink noise with whatever poweramp you have will do, I can apply an approximation of a reverse impedance curve EQ later.

Interesting - no, it shouldn't be empty. I used the 6505 with Resonance & Presence both on 0, hooked up to both my 1960BV cab (16 ohm) as well as the Mesa 4x12 OS Straight (8ohm) and trained a "Dry/Wet" profile using the 1960BV as the "Dry" and the OS Straight as "Wet".

 

[James Freeman]

Interesting - no, it shouldn't be empty. I used the 6505 with Resonance & Presence both on 0, hooked up to both my 1960BV cab (16 ohm) as well as the Mesa 4x12 OS Straight (8ohm) and trained a "Dry/Wet" profile using the 1960BV as the "Dry" and the OS Straight as "Wet".

Just the impedance curve difference?
Thank you but I need and actual recording of the cab as described in the first post.
If you zero Resonance and Presence a standard tube power amp will also do, I can undo the slight impedance imprint later.

 

[2dor]

Just the impedance curve difference?
Thank you but I need and actual recording of the cab as described in the first post.
If you zero Resonance and Presence a standard tube power amp will also do, I can undo the slight impedance imprint later.

Yeah - just the delta.

I'll try the pink noise sometime later this week; my recording setup's fixed atm since I'm trying to finish reamping for the 6505 + 1960BV cab profiles.