Cable management with pre and post effects (real pedals)

BahamaDada

Roadie
Messages
671
For the first time ever I will be using a real effects loop on an amp. For the last 20ish years I either played without loop (all mod and delay before the preamp) or did not have pedals like delay or mod at all.

Now with a DD8 arriving today this might change as I want to use that for lead stuff and solos.

My pedalboard now basically looks like a spaceship (not in size) with all the cables going to it and coming from it.

Are there better solutions for that? How do you manage this? I would be glad to hear your ideas/solutions.

Or maybe just a hearty "live with it, sucker".
 
Popular options are things like a cable snake (multiple cables bundled together), and/or using a patchbay on the board so you have one central point for plugging in cables instead of "plug this cable on the right side and this on the left side".

You can just buy a patchbay meant for a different pedalboard or build one yourself if you can solder. For example I have one of the Temple Audio 4x MOD modules mounted on my Nux Bumblebee M with some 3M Dual Lock.

The configuration on mine looks like this:
  1. Pre-fx to amp.
  2. Nothing atm. Will likely become another pre send for running stereo into two BluGuitar Amp 1s.
  3. Amp fx loop send goes here.
  4. Post-fx to amp fx return.
 
i use this. its good. 4 cables in one. i put colored electrical tape at the end of each one

 
I made my own looms out of Techflex and heat shrink. Easy to do or just buy the one posted above. Just be sure you have a way to label the cables. I use different color cables for send / return / amp input. I probably have 5 looms made at this point for different sizes.
 
i use this. its good. 4 cables in one. i put colored electrical tape at the end of each one


That looks very decent and isn't too expensive, either (will possibly pay off after 2 times of using it already). Pretty much the same thing I once used, but back then I had to get the tube from some medical stuff supply. Wasn't *that* much cheaper IIRC.

Most important thing here: Lengthen your cables properly. I'd think about having the cables tied to the board. Worked pretty well for me, it's one round of cabling less and you don't stress the sockets.
 
i use this. its good. 4 cables in one. i put colored electrical tape at the end of each one

Thanks for that👍
It’s a handy site 🍺
 
I’ve been a straight in guy for ever except for a few exceptions know and again.
I like having options but since I got the GigRig Quartermaster gs 10 switcher for my new board build a few weeks ago to simplify things .
1751551706960.jpeg
i
The option of using both straight in and effects loop to use two amps confused the hell out of me at first .🤣
 
Last edited:
Organizing cable runs is good, eliminating cable runs is better.

I keep as much gear as possible off the pedalboard and back with the amp head/ cab/ whatever the case may be. Typically this would mean pre-amp stuff at your feet, post-amp (FX loop) stuff e.g. DD8 on the amp with nice short patch cables.

MIDI control is your friend - wireless MIDI is better (though I get that some people have a hard time trusting it.) Depending on what you're using for pre- effects, you might even be able to push some of that back to the amp, and keep a controller of some kind in front of you. (If I'm all digital in 4cm, it's 4 short cables, with one wireless expression pedal in front of me, whose function varies depending on the song. Very little to think about apart from the guitar... which is about all I can handle and sometimes more LOL.)

Lastly: high capacity batteries are cheaper, smaller, and better than ever. Hunt around Amazon or wherever you prefer - so many easy ways to eliminate AC cords and DC power supplies.
 
Last edited:
i use this. its good. 4 cables in one. i put colored electrical tape at the end of each one

I have one of these too. Also ran my power extension cord through this so I could plug my pedalboard power into it so only one cable run to the back of the stage.

Found old pic I had:

9D3E1EFF-98F1-4650-AE51-84853B40666C.jpeg
 
Important note-

If you use some kind of patchbay/junction box, you’ll want an isolated one anytime you’re utilizing the amp’s effects loops or you’ll get some ground noise. I just looked this up last night because I’m going to make one for my FM9 board.

American Loopers makes a basic one for $65- https://www.americanloopers.com/col...n-box-pedalboard-patchbay-with-isolated-jacks

On that same page there’s a link to a box that allows to route the effects to the front of the amp without pulling any cables on the pedalboard in the event you ever wanted to go back to playing with the delay in front.
 
Back
Top