Andy Eagle ( Guitar repair tech for 30 years )

Carvel Art series; the ones Ed taped and played.
IMG_9117.jpeg

IMG_5072.jpeg

IMG_5074.jpeg

IMG_5073.jpeg

In for a full EVH set up because this get played.
The original setup has serious issues.
The Floyd has no clearance under the leading edge and the bolts cut in to the finish underneath.
The last fret is high because the fingerboard has pressure from underneath on the overhang.
 
The issue was known because the pick guard was filled to fit under the overhang.
IMG_5070.jpeg

IMG_5059.jpeg

The damage under the Floyd.
IMG_5057.jpeg

This gave me the opportunity to look at the pickup and meter it. It’s basically a prototype Wolfgang EVH on a Fender platform.
The guitar would need a small shim to get the clearance and Also lift the overhang. Even with a modified pick guard.
IMG_5075.jpeg

Done.
 
The issue was known because the pick guard was filled to fit under the overhang.
View attachment 60993
View attachment 60994
The damage under the Floyd.
View attachment 60995
This gave me the opportunity to look at the pickup and meter it. It’s basically a prototype Wolfgang EVH on a Fender platform.
The guitar would need a small shim to get the clearance and Also lift the overhang. Even with a modified pick guard.
View attachment 60996
Done.

Had a brand new Player 2 Telecaster (22 frets) with same problem. After shimming neck pocket to verify source of problem, I used a dremel to thin the back of the pickguard under the overhang so I could remove the shim.
 
I was 14 the first time I saw a Parker Fly. I thought it was the ugliest guitar I'd ever seen, however, the older I get the cooler they look to me. I've never gotten to play one but I'd like to.
I used to have two Nightflys and a Deluxe. I like them but didn’t want to be the one trying to glue the frets back on or get hold of impossible parts down the line . Support is completely absent now.
 
I used to have two Nightflys and a Deluxe. I like them but didn’t want to be the one trying to glue the frets back on or get hold of impossible parts down the line . Support is completely absent now.

I'd mostly just like a go on one at this stage.
 
Back
Top