- Messages
- 204
Hi, just had a quick look at the H90 and I don't think you should have any issues with it as looks pretty flexible. I don't have one (not I have a JVM with me either) to test but I'd try two options:Cheers Santiago, take all the time you need. It's essentially one digital unit set to instrument level acting as a host to some other gadgets.
Thank you
1- use the Power amp insert loop, set the H90 as LINE level. This series-only loop is just a passive insert in the signal before the power amp. The level here is on the hot side, I have used without problems with devices that tolerate line levels but you'll see the vu-meters quite high
2- Use the series/parallel switchable loop in LINE level (H90 again set to line), then set the MIX on the back to 100%.
I am assuming that you will have the JVM loop ON all the time, is this correct? If this is the case you shouldn't have any issues at all with the parallel loop (if you set the mix to 100%)