Recording with HX Stomp tonight. What's up with the Volume block?

[HomespunEffects]

I'm running Logic Pro (latest version). I was running a patch with a Volume block in it. Every time I hit stop and rewind to beginning the volume block would switch to zero. Let me tell you, it took quite a while to figure out what was happening and why my sound just quit all of a sudden.

Does the stop and rewind button on the Logic Pro interface send a midi signal to the HX Stomp to turn the volume down? Is there a way to make it not do that? I don't have the volume pedal attached (because I don't know where I put it). Would plugging it in help?

I temporarily solved the issue by removing the Volume block from the patch.

 

[HomespunEffects]

@Digital Igloo any idea about this?

 

[laxu]

Have you accidentally put some automation on it?

 

[HomespunEffects]

Have you accidentally put some automation on it?

No. I even tried removing the automation track and creating a new track and creating a new project.

It happens when you click stop and then rewind to start.

 

[JiveTurkey]

Turn off incoming midi on the Stomp, see if it still happens?

 

[HomespunEffects]

Turn off incoming midi on the Stomp, see if it still happens?

Good idea. I’ll try it.

 

[HomespunEffects]

You can see it happening here if you click the stop button twice:

Turn off incoming midi on the Stomp, see if it still happens?

Turning off MIDI PC Rx didn't help but turning off USB MIDI did. Thanks.

 

[JiveTurkey]

You can see it happening here if you click the stop button twice:



Turning off MIDI PC Rx didn't help but turning off USB MIDI did. Thanks.

That makes perfect sense. Good it's sorted. If not ideally.

 

[HomespunEffects]

That makes perfect sense. Good it's sorted. If not ideally.

Well, I generally don’t use MIDI with the Stomp so I’m thinking it’s good to do. Thanks.

This never happened before I upgraded Logic so it’s probably a new setting that I have to find.