KMA endgame recording

[Stoic_demeanor]

Happy holidays!

I hope all is well. I have a question regarding the KMA Endgame pedal, which I purchased a few months ago. Is it possible to record the endgame effect without it being part of the signal chain between the guitar and amp, but still have it affect the recorded signal in the DAW?

My setup would involve using a dedicated mic on the amp to capture the guitar sound, with the guitar plugged directly into the amp. The pedal would not be affecting the live signal sent to the amp, so it would remain clean, but I would still want to record the effect of the KMA Endgame in the DAW. In other words, I want the KMA effect to be applied to the recorded guitar part, but not to the live sound coming out of the amp.

Maybe place it after a di box?

Is this possible? If so, how would I set it up to achieve this?

Thank you!

 

[Ed DeGenaro]

Guessing you mean the doubler only, not the power amp/speaker sim part.
That the end result is a dry gtr track and the left/right doubler?

You pretty much have to "reamp" your recorded signal.
As in send it out via external aux to endgame fx return with doubler set post loop and route it back into your interface/DAW.

So what interface what DAW?

 

[Alex Kenivel]

In essence you need to send the recorded guitar part from an output on an interface to the effect and have the affected signal come back to inputs on an interface for recording.