HX Effects to amp and FOH? 4 cable method

Ledvedder

Groupie
Messages
77
I currently use an HX Effects in 4cm with my 20 watt Marshall. Then I just mic my speaker cab. Is there a way I can load an IR into the HX Effects and send directly to FOH? And also have my on stage sound out of my amp, but not needing to mic it?
 
Yep. You will be applying an IR to the preamp section of the Marshall only. Not ideal especially if you're up loud and getting power amp saturation. It will "work" technically speaking.
 
I tried this option, and it seems to work well.

In my 4CM patch I added an IR block last in the Path and a Send 2 block before that.

Connect:

guitar -> HX In
HX Send 1 -> amp input
HX Send 2 -> amp return
HX Out -> FOH
amp Send -> HX return 1
 
If this becomes the norm for you I’d recommend getting a DI you can put between your power amp and speakers - this would allow your amp signal going into the HXFX to also include the power amp’s contribution as well as the cab impedance interaction.

Or have your tech put a slave out on your amp. Then you don’t need the outboard DI.
 
If this becomes the norm for you I’d recommend getting a DI you can put between your power amp and speakers - this would allow your amp signal going into the HXFX to also include the power amp’s contribution as well as the cab impedance interaction.

Or have your tech put a slave out on your amp. Then you don’t need the outboard DI.
Can you recommend a decent DI? There are so many different types, I'm not exactly sure which to get.
 
Back
Top