Boss 200 Series Pedals Design Floor ?

[Dave Lewis]

I was ready yesterday to build my Boss 200 pedalboard using all of the 200 series pedals .
When It suddenly dawned on me It can’t be done unless they are all laid out side by side or one uses a 8 pedal switching system.
Because of the sloping front angle they can’t be laid above each other
I’m guessing people have probably already noticed this before

 

[JiveTurkey]

Pedaltrain makes some lifts that will angle pedals upwards? Might be interesting to see how they sit. If you have a slanted board; you could flip the top row of 200 series pedals around so the switches are at the top? I'd probably just do side by side.

 

[Chocol8]

You can use a riser for the back row. It sucks, but that is life.

 

[Dave Lewis]

Pedaltrain makes some lifts that will angle pedals upwards? Might be interesting to see how they sit. If you have a slanted board; you could flip the top row of 200 series pedals around so the switches are at the top? I'd probably just do side by side.

On any flat or slanted board it’s the same and even flipped you still hit the controls .
I’m a size uk size 8 and bigger feet would be worse.
I thought about using lifts but it angles the sockets on the back down to far.and you would still stomp on the pedal controls in front.
So it’s going to have to be a switcher or a side by side board .

 

[JiveTurkey]

On any flat or slanted board it’s the same and even flipped you still hit the controls .
I’m a size uk size 8 and bigger feet would be worse.
I thought about using lifts but it angles the sockets on the back down to far.and you would still stomp on the pedal controls in front.
So it’s going to have to be a switcher or a side by side board .

I think side by side would look the best anyway

 

[Dave Lewis]

I think side by side would look the best anyway

Yeah same here but it’s going to be a task to find a wide enough board that doesn’t have lots of useless extra space above and comes in a case or bag ?

 

[Jarick]

That's a bummer! I really love the look of those 200 series and have totally thought about a row of them.

 

[Dave Lewis]

I might just get a small studio Millenium rack and draws from Thomann and put them in that.

​

 

[metropolis_4]

On any flat or slanted board it’s the same and even flipped you still hit the controls .
I’m a size uk size 8 and bigger feet would be worse.
I thought about using lifts but it angles the sockets on the back down to far.and you would still stomp on the pedal controls in front.
So it’s going to have to be a switcher or a side by side board .

My SDE-3000d is the same shape and it works fine for me on the back row with lifts

 

[Dave Lewis]

My SDE-3000d is the same shape and it works fine for me on the back row with lifts

View attachment 49872

Put the same pedal that has lots of controls below it and it won’t.
You will heel stomp the lower pedal.
To much farting about.

 

[paisleywookiee]

My SDE-3000d is the same shape and it works fine for me on the back row with lifts

View attachment 49872

This is how our pedalboard guy builds it, and no one has ever had a problem.

 

[FuzzyAce]

If you're handy just build a stepped board. Easy peasy, lemon squeezy.

 

[slip]

I've never been able to pull off yellow shoes.